Adaptor Stuck (Suspect Prongs Melted) In Wall Socket? Some Advice Please :)? - HotUKDeals
We use cookie files to improve site functionality and personalisation. By continuing to use HUKD, you accept our cookie and privacy policy.
Get the HUKD app free at Google Play

Search Error

An error occurred when searching, please try again!

Login / Sign UpSubmit

Adaptor Stuck (Suspect Prongs Melted) In Wall Socket? Some Advice Please :)?

£0.00 @
As above. I bought a kettle from Amazon a while back, but to my dismay it had an EU plug. No problem, I thought, I have an EU to UK 13amp adaptor spare, I'll use that. Looks like this - http://i.ebayi…
louiselouise Avatar
3m, 3w agoPosted 3 months, 3 weeks ago
As above. I bought a kettle from Amazon a while back, but to my dismay it had an EU plug. No problem, I thought, I have an EU to UK 13amp adaptor spare, I'll use that. Looks like this - http://i.ebayimg.com/images/g/AKIAAOSw~gRVsexy/s-l1600.jpg

Kettle was working fine, the plug and wall socket are rarely touched.

Today when using the kettle I noticed a zapping sound (which I now know is arcing), baffling as I wasn't doing anything unusual. So I switched the socket off and took the EU plug out the adaptor, but the adaptor itself is stuck fast to the wall socket! There's no burning or any other ominous signs.

I've read that this can mean the prongs have melted as some sort of bad connection has caused a problem - even that the wall socket itself may need replacing.

I'm a bit fearful of electrics - what should I do? I've read I can turn off the supply at the fuse box and use a blunt instrument to prise it out. I'm guessing that socket is dangerous until I get it inspected?

Will I be okay to simply wire on a UK plug onto the EU kettle (assuming it's still working)?

Thanks. Yours rather nervously, :)
Tags:
louiselouise Avatar
3m, 3w agoPosted 3 months, 3 weeks ago
Options

All Responses

(17) Jump to unreadPost an answer
Responses/page:
#1
Picture of adaptor for those that don't want to clicky -
http://i.ebayimg.com/images/g/AKIAAOSw~gRVsexy/s-l1600.jpg
#2
Nervous of electrics, call an electrician get them to test the socket and replace if needed, they may test the kettle as well for you.
#3
I will :) I've been tugging at the adaptor like a madwoman - until I started reading articles, probably not very bright. I'll try and remove it once it's daylight and I can switch the electricity off. Then get on the phone :)
#4
Replacing the socket is an easy diy job but I wouldn't know about the kettle . You could put British plug easy enough but something was wrong in the first place
#5
louiselouise
I will :) I've been tugging at the adaptor like a madwoman - until I started reading articles, probably not very bright. I'll try and remove it once it's daylight and I can switch the electricity off. Then get on the phone :)


​when you say a EU plug you mean its got 2 pins.
does it have any metal at all you can see on the outside of the plug when its plugged in.
#6
shadey12
louiselouise
I will :) I've been tugging at the adaptor like a madwoman - until I started reading articles, probably not very bright. I'll try and remove it once it's daylight and I can switch the electricity off. Then get on the phone :)
​when you say a EU plug you mean its got 2 pins.
does it have any metal at all you can see on the outside of the plug when its plugged in.
This sort of plug (Schuko? plug)
http://www.worldstandards.eu/WordPress/wp-content/uploads/electricity-type-EF-plug-1-249x300.jpg

The EU plug and adaptor were in tight, never touched. No bare metal.
#7
louiselouise
shadey12
louiselouise
I will :) I've been tugging at the adaptor like a madwoman - until I started reading articles, probably not very bright. I'll try and remove it once it's daylight and I can switch the electricity off. Then get on the phone :)
​when you say a EU plug you mean its got 2 pins.
does it have any metal at all you can see on the outside of the plug when its plugged in.
This sort of plug (Schuko? plug)
http://www.worldstandards.eu/WordPress/wp-content/uploads/electricity-type-EF-plug-1-249x300.jpg

The EU plug and adaptor were in tight, never touched. No bare metal.


​the adaptor you have used does not have a earth connection.
its designed for low power double insulated products, definitely not kettles. the bit of metal on the kettle plug that is not the 2 pins is the earth, it is there for safety, the equivalent in our plugs is the top pin of the plug. the yellow and green wire go to it if you look inside the plug.
using a kettle with this adaptor is dangerous.
when you try to take the adaptor out tomorrow make sure all the electric is off usually all the sockets in the kitchen are on the same fuse. plug something in to the other sockets to check after you have turned off the power. it will be the biggest switch and usually marked. the adaptor is most probably just stiff in the socket as they are not well made. yes you can put a British plug on the kettle.
if in any doubt get someone else to do it
better to be safe than sorry.
#8
shadey12
louiselouise
shadey12
louiselouise
I will :) I've been tugging at the adaptor like a madwoman - until I started reading articles, probably not very bright. I'll try and remove it once it's daylight and I can switch the electricity off. Then get on the phone :)
​when you say a EU plug you mean its got 2 pins.
does it have any metal at all you can see on the outside of the plug when its plugged in.
This sort of plug (Schuko? plug)http://www.worldstandards.eu/WordPress/wp-content/uploads/electricity-type-EF-plug-1-249x300.jpg
The EU plug and adaptor were in tight, never touched. No bare metal.
​the adaptor you have used does not have a earth connection.
its designed for low power double insulated products, definitely not kettles. the bit of metal on the kettle plug that is not the 2 pins is the earth, it is there for safety, the equivalent in our plugs is the top pin of the plug. the yellow and green wire go to it if you look inside the plug.
using a kettle with this adaptor is dangerous.
when you try to take the adaptor out tomorrow make sure all the electric is off usually all the sockets in the kitchen are on the same fuse. plug something in to the other sockets to check after you have turned off the power. it will be the biggest switch and usually marked. the adaptor is most probably just stiff in the socket as they are not well made. yes you can put a British plug on the kettle.
if in any doubt get someone else to do it
better to be safe than sorry.
Oh dear, didn't realise that adaptor was a no-no with a kettle, thanks for letting me know. I will put a British plug on the kettle. I'm unsure if anything has "tripped" or burned but I'll tackle it in the morning.

Hard for me to say if the adaptor is just "stiff" as it's basically been plugged in and forgotten about!
#9
Do not use the kettle until it is tested.
You should find someone competent to check the socket for you, it probably does need replaced. It is not an expensive item nor a difficult job for someone who knows what they are doing.
And, I would agree with the poster above who says that the adaptor appears to be unsuitable for the type of plug in the pictures.


Edited By: scottswaha on Nov 04, 2016 02:04
#10
louiselouise
shadey12
louiselouise
shadey12
louiselouise
I will :) I've been tugging at the adaptor like a madwoman - until I started reading articles, probably not very bright. I'll try and remove it once it's daylight and I can switch the electricity off. Then get on the phone :)
​when you say a EU plug you mean its got 2 pins.
does it have any metal at all you can see on the outside of the plug when its plugged in.
This sort of plug (Schuko? plug)http://www.worldstandards.eu/WordPress/wp-content/uploads/electricity-type-EF-plug-1-249x300.jpg
The EU plug and adaptor were in tight, never touched. No bare metal.
​the adaptor you have used does not have a earth connection.
its designed for low power double insulated products, definitely not kettles. the bit of metal on the kettle plug that is not the 2 pins is the earth, it is there for safety, the equivalent in our plugs is the top pin of the plug. the yellow and green wire go to it if you look inside the plug.
using a kettle with this adaptor is dangerous.
when you try to take the adaptor out tomorrow make sure all the electric is off usually all the sockets in the kitchen are on the same fuse. plug something in to the other sockets to check after you have turned off the power. it will be the biggest switch and usually marked. the adaptor is most probably just stiff in the socket as they are not well made. yes you can put a British plug on the kettle.
if in any doubt get someone else to do it
better to be safe than sorry.
Oh dear, didn't realise that adaptor was a no-no with a kettle, thanks for letting me know. I will put a British plug on the kettle. I'm unsure if anything has "tripped" or burned but I'll tackle it in the morning.

Hard for me to say if the adaptor is just "stiff" as it's basically been plugged in and forgotten about!


​is it a double wall socket or a single, obviously if its a double just plug something into the other one. if it works none of your fuses have blown or tripped. if where all you fuses are (consumer unit/distribution board) are switches they should be labeled. all the ones been used should be in the up position.
#11
shadey12
louiselouise
shadey12
louiselouise
shadey12
louiselouise
I will :) I've been tugging at the adaptor like a madwoman - until I started reading articles, probably not very bright. I'll try and remove it once it's daylight and I can switch the electricity off. Then get on the phone :)
​when you say a EU plug you mean its got 2 pins.
does it have any metal at all you can see on the outside of the plug when its plugged in.
This sort of plug (Schuko? plug)http://www.worldstandards.eu/WordPress/wp-content/uploads/electricity-type-EF-plug-1-249x300.jpg
The EU plug and adaptor were in tight, never touched. No bare metal.
​the adaptor you have used does not have a earth connection.
its designed for low power double insulated products, definitely not kettles. the bit of metal on the kettle plug that is not the 2 pins is the earth, it is there for safety, the equivalent in our plugs is the top pin of the plug. the yellow and green wire go to it if you look inside the plug.
using a kettle with this adaptor is dangerous.
when you try to take the adaptor out tomorrow make sure all the electric is off usually all the sockets in the kitchen are on the same fuse. plug something in to the other sockets to check after you have turned off the power. it will be the biggest switch and usually marked. the adaptor is most probably just stiff in the socket as they are not well made. yes you can put a British plug on the kettle.
if in any doubt get someone else to do it
better to be safe than sorry.
Oh dear, didn't realise that adaptor was a no-no with a kettle, thanks for letting me know. I will put a British plug on the kettle. I'm unsure if anything has "tripped" or burned but I'll tackle it in the morning.
Hard for me to say if the adaptor is just "stiff" as it's basically been plugged in and forgotten about!
​is it a double wall socket or a single, obviously if its a double just plug something into the other one. if it works none of your fuses have blown or tripped. if where all you fuses are (consumer unit/distribution board) are switches they should be labeled. all the ones been used should be in the up position.
It's a double socket. I've been too scared to try it, especially after reading online!
#12
louiselouise
shadey12
louiselouise
shadey12
louiselouise
shadey12
louiselouise
I will :) I've been tugging at the adaptor like a madwoman - until I started reading articles, probably not very bright. I'll try and remove it once it's daylight and I can switch the electricity off. Then get on the phone :)
​when you say a EU plug you mean its got 2 pins.
does it have any metal at all you can see on the outside of the plug when its plugged in.
This sort of plug (Schuko? plug)http://www.worldstandards.eu/WordPress/wp-content/uploads/electricity-type-EF-plug-1-249x300.jpg
The EU plug and adaptor were in tight, never touched. No bare metal.
​the adaptor you have used does not have a earth connection.
its designed for low power double insulated products, definitely not kettles. the bit of metal on the kettle plug that is not the 2 pins is the earth, it is there for safety, the equivalent in our plugs is the top pin of the plug. the yellow and green wire go to it if you look inside the plug.
using a kettle with this adaptor is dangerous.
when you try to take the adaptor out tomorrow make sure all the electric is off usually all the sockets in the kitchen are on the same fuse. plug something in to the other sockets to check after you have turned off the power. it will be the biggest switch and usually marked. the adaptor is most probably just stiff in the socket as they are not well made. yes you can put a British plug on the kettle.
if in any doubt get someone else to do it
better to be safe than sorry.
Oh dear, didn't realise that adaptor was a no-no with a kettle, thanks for letting me know. I will put a British plug on the kettle. I'm unsure if anything has "tripped" or burned but I'll tackle it in the morning.
Hard for me to say if the adaptor is just "stiff" as it's basically been plugged in and forgotten about!
​is it a double wall socket or a single, obviously if its a double just plug something into the other one. if it works none of your fuses have blown or tripped. if where all you fuses are (consumer unit/distribution board) are switches they should be labeled. all the ones been used should be in the up position.
It's a double socket. I've been too scared to try it, especially after reading online!


​leave it until tomorrow and ask someone.
be safe.
#13
Thanks so much for your help last night shadey12, I will remove the plug (hopefully), electricity turned off first of course! after lunch with baby brother :)
#14
The euro plugs aren't earthed and a kettle is high voltage, prob higher than the adapter you used.

It probably melted the socket/casing box around the inside of the plug itself. Easy enough to take the whole lot out of the wall. Make sure you turn the sockets fuses off first! Good luck.
#15
If it's a switched socket, it's probably burned out the switch, though that adapter is supposedly rated 13A and has a 13A fuse, it does not look up to it, and is incorrect, the Schuko has a side earth contact.

You might be lucky with the socket if you do manage to get it out, but the switch may be stuck in the on position, or in the off.

Changing a socket, is a job that can be done by a diy-er or competent handyman, it does not require certification.
Key point is being able to verify that the circuit is OFF before attempting..
Because of the ring main, there will be TWO joined connections for each, LIVE, Neutral, Earth.
One possible difficulty is if a replacement socket presents different positions for the wires, as the stiff wires can be awkward to reposition.
#16
It's a double socket, with switches - the switch still operates, though I haven't tested the wall socket to see if it still powers anything. Was out longer than expected and it was dark when I got home :) Tomorrow, then :)

Edited By: louiselouise on Nov 04, 2016 23:34
#17
louiselouise
Thanks so much for your help last night shadey12, I will remove the plug (hopefully), electricity turned off first of course! after lunch with baby brother :)


​no problem
hope you get/got sorted.

Post an Answer

You don't need an account to leave a response. Just enter your email address. We'll keep it private.

...OR log in with your social account

...OR comment using your social account

Looking for Twitter login?
Thanks for your comment! Keep it up!
We just need to have a quick look and it will be live soon.
The community is happy to hear your opinion! Keep contributing!