We use cookie files to improve site functionality and personalisation. By continuing to use HUKD, you accept our cookie and privacy policy.
Close

Corsair Vengeance PC Memory 8GB 2x4GB DDR3 - Dabs Outlet - eBay - £36.99 Posted

DJ SplitzDJ Splitz

Thought this was a great deal for anyone needing more ram, especially if you tend to overclock

Overclocking Memory from Corsair - the Leader in Performance Memory Solutions

CORSAIR high performance Vengeance memory module 8GB (2x4GB) 1600MHz 9-9-9-24, 1.5V for motherboards using AMD, Intel dual channel processors and upcoming 2nd Generation Intel Core platforms. Vengeance memory modules provide users with outstanding memory performance and stability. Each module is built using carefully selected DRAM to allow excellent overclocking performance, and has a limited lifetime warranty.

Key Features

8GB (2x4GB) DDR3 for AMD, Intel Dual processors and new 2nd Generation Intel Core platforms
1600MHz
9-9-9-24 latency
Vengeance heat spreader for styling and performance
Intel XMP (Extreme Memory Profile) Support
Limited Lifetime Warranty
Specifications

Density: 8GB (2x4GB Module)
Speed: 1600MHz
Timing: 9-9-9-24
Type: DDR3
Format: DIMM
Pin Out: 240 Pin
Voltage: 1.5V

TIP: Get the Best Deals In Your Inbox

or
293° Hot Cold

All Comments (30)

Jump to unread Post a Comment
1
    Thomas.
    I'm Planning on building an i5 3570k +Gigabyte Z77-D3H Intel Z77 (Socket 1155) DDR3 system. Should I go for some of this RAM? Have read that it's better to go for low profile...

    Edited By: Thomas. on Jul 02, 2012 12:18: .
    weegee900
    Saw Megan Fox in town at the weekend. Gave her some more ram
    Waterboy8535
    Thomas.
    I'm Planning on building an i5 3570k +Gigabyte Z77-D3H Intel Z77 (Socket 1155) DDR3 system. Should I go for some of this RAM? Have read that it's better to go for low profile...


    I have this and whilst it's cracking RAM, it was a PITA trying to fit it onto my Asus Motherboard. I have the Gelid GX7 CPU Heatsink (here: http://www.overclockers.co.uk/showproduct.php?prodid=HS-003-GD&groupid=701&catid=57&subcat=1395) and the only way I could get it all fitted was to actually fit the memory first and then the CPU Heatsink. Trying the other way din't work as the heatsink on this RAM are pretty high and i couldn't get it under straight.

    Even then I still had to flip the fan onto the other side of the heatsink so the RAM didn't hit it.

    If your CPU is close to the memory slots then be careful or buy this memory but with the smaller heatsinks.


    Edited By: Waterboy8535 on Jul 02, 2012 13:06
    mon94key
    Thomas.
    I'm Planning on building an i5 3570k +Gigabyte Z77-D3H Intel Z77 (Socket 1155) DDR3 system. Should I go for some of this RAM? Have read that it's better to go for low profile...


    i got that board and this ram, works fine togher got a artic 11 pro cpu cooler as well and it all fits snug, [yet to fit gfx card as im waiting for cheap prices i missed out on the engtx560 ti from pcworld gutted!] you should be allright whats the case your going to use?
    Thomas.
    mon94key
    whats the case your going to use?

    Nice one, thanks. Getting a Zalman Z9 most probably..
    DJ Splitz
    I purchased this on Friday and it has arrived today! excellent service if you ask me.

    This is to go into a Shuttle SZ77R5 with an i5 2500k, Samsung 128gb SSD and GTX 580 classified.

    It does make sense to go for the low profile if you have a large CPU heat sink that will get in the way, otherwise the ram is 5.3cm in height and the heat sink on top is 0.7cm wide.

    Edited By: DJ Splitz on Jul 02, 2012 13:41
    mon94key
    Thomas.
    mon94key
    whats the case your going to use?

    Nice one, thanks. Getting a Zalman Z9 most probably..


    will happly all fit inside, do you not wanna future proof your self and get a case with usb 3.0 slots? i got 4 usb 3.0 slots [2 on mobo 2 on case] and 6 usb 2.0 slots [2 on case 4 on mobo] inless im looking at wrong case it doesnt have any usb 3.0 slots on front?
    Thomas.
    I'm not too fussed to be honest, i'll still have USB 3.0, just not on the front.

    If there's a case in the price/quality range as the Z9 plus with front USB 3's, then by all means forward me...
    gambe1984
    Stick with the low profile ram, its a little moree expensive but more like to fit under most modern cpu fans as most boards seem to place them fairly close, if they fit though its cracking ram on paper
    gambe1984
    Stick with the low profile ram, its a little moree expensive but more like to fit under most modern cpu fans as most boards seem to place them fairly close, if they fit though its cracking ram on paper
    cejiogu1
    Thomas.
    I'm not too fussed to be honest, i'll still have USB 3.0, just not on the front.

    If there's a case in the price/quality range as the Z9 plus with front USB 3's, then by all means forward me...


    Go for the Z11 plus, amazing case although does cost a little bit more.
    I use this ram with it.
    Danciel
    Bought from this outlet a few weeks ago, RAM arrived in a massive box and both sticks were faulty.

    Exchanged after, working alright so far. Just remember to use Memtest86.
    kunyk
    why do people think they need heatsinks on RAM?

    new Samsung 30nm DDR3 RAM doesn't have any heatsink at all and can easily hit over 2000MHz.

    let alone the fact that RAM overclocking has about 0% real impact on anything.
    pakomen
    I can't understand, why is this not available in Northern Ireland?
    Jakabok
    Nice timing! I was about to drop 40 quid on 8 gigs of slower 1333Mhz RAM.
    FelixofMars
    I bought some of this off Amazon direct a few months ago. I have no issue with it and it was reviewed quite well.
    MaximusRo
    they buy them for style I guess... marketing works.

    SSD and USB memory go down, DRAM goes up.
    Paradoxine
    Trust me when I say if you plan on running any kind of large CPU cooler then just get the low profile and save yourself the hassle. Otherwise grab these, great memory.
    XxS7U4R7xX
    Thomas.
    I'm Planning on building an i5 3570k +Gigabyte Z77-D3H Intel Z77 (Socket 1155) DDR3 system. Should I go for some of this RAM? Have read that it's better to go for low profile...


    Recently built my first custom PC with your chosen products above. I went for the LP corsair ram as i didn't want to risk getting something too high profile just in case I buy a bigger and better air cooled CPU cooler in the future. I got my ram from Scan for £39.
    Joe_Crow
    Just bought this in advance for the PC I'll soon build. It's worth it for this price. Cheers.

Post a Comment

You don't need an account to leave a comment. Just enter your email address. We'll keep it private.

I Approve
Your Comments On This Post
Comment Preview
Close

PRIVATE MESSAGE

Close
Sorry, you can’t currently send PMs. Once you’re a more active member of the forum, the PM service will be unlocked for you.
Welcome to HUKD!
Close
Join the Community