Came across this product and ordered this for our hallway and kid's room.
Looks very handy without having a bright sensor light or constantly turned on light.
Smart Nightlight: Warm soft glow of bed light will turn on to guide you safely across the room in the dark, no disturbing glare to wake others.
Auto shut-off timer can be set from 30 seconds to 10 minutes. PIR motion sensor, 120 wide angel detection way, makes the body movement detection in large angle and longer distance.
Application:Under bed light, but also covers a wide range of home applications like stairway, cabinet, cupboard, sofa, furniture etc
Effortless Installation:Installing the product is a matter of just a few minutes and some easy steps. It requires no tool and no electrician. The product comes along with a 3-meter adhesive tape.
Package Content:1 x MINGER Motion Bedlight; 1 x Human body sensor; 1 x Power Adapter; 1 x Manual; 2 x KA3X12mm Screws; 4 x KA3X8mm Screws; 4 x Retaining Clips.
1. To turn on the light sensor, you may need to use a widget like coin to rotate the sensor on the back of the detector to the left-most.
2.Then the LED will sense the light and no light up in the daytime.
Light color: warm white
Color temperature: 3000-3500K
LED type: SMD 3528
LED QTY: 90leds per 1.5M
Strip light length: 1.5M
Inductive range:3.5m ,1200
Luminous Flux: 6-8LM/per LED
Power adapter: DC 12V 3A
Power cable length: 1.2m
Continuous lighting time: 30s
The light strips are widely used in under bedside, baby room, kitchen, bathroom, cabinets, bookshelf, wardrobe and so on.
1.Clean the dust, ensure the paste place under the bed frame is free from dust before installation to avoid falling off.
2.Remove the 3m adhesive backing on the strip.
3.Stick the bed light LED strip down the be frame with the 3m adhesive tapes.
Zero-Risk Purchase,100% Satisfaction Guarantee
90 days 100% Money-Back Guarantee. We will refund you immediately if you are not satisfied with our products.