Highly professional audio PA speaker. Usually £300 new. This is as new; It's out of box, I've used it twice to test it and never gigged with it - not even "burnt in" yet. Only selling because I've got one too many - yes, they're that good. These are really very rugged speakers for the money.
It's passive rated 500W RMS @ 8 ohms, so you'll need a decent amplifier. But if you're viewing this, you probably know that already.
Cash on collection, if you like you can come and hear it before you buy.
The Delta 15 uses a high output, low distortion 15” cast frame woofer with a 3” voice coil. A 2” titanium compression driver is coupled to 90°x45° elliptical waveguide for smooth HF dispersion.
Comprehensive rigging points are provided for use in flown applications, so Delta 15 is equally at home in a wide variety of fixed installation and touring applications. Rhino Rock™, our new texturised composite finish is used in all models. This new finish provides the great look of a painted finish with the durability of a carpet covered enclosure giving you the best of both worlds. The Delta 15 is constructed from plywood and features dual angle pole mounts to ensure that your sound is aimed directly at the audience, not at the ceiling.
MODEL DELTA 15
MAX SPL (CALCULATED)
DB SPL @ PEAK RATED POWER 131dB
(H @1KHZ) 90°
(V @1KHZ) 45°
RECOMMENDED HIGH PASS FREQUENCY 1.5KHz / 1.8KHz
RECOMMENDED HIGH PASS SLOPE 18dB/Oct
CROSSOVER FREQUENCY 1.8KHz
BI-AMP MODE SWITCH Yes
LF SIZE 404mm / 15"
LF POWER (CONTINUOUS RMS) 500w
LF SENSITIVITY (FREE FIELD 1W @ 1M) 98dB
LF VOICE COIL 76.2mm / 3"
LF CONE MATERIAL Paper
LF VOICE COIL MATERIAL Copper
LF VOICE COIL FORMER MATERIAL Fibre Glass
LF BASKET MATERIAL Aluminium
LF BASKET TYPE Die-Cast
LF MAGNET STRUCTURE MASS 2.467Kg / 5.412lbs
LF MAGNET STRUCTURE MATERIAL Ferrite
HF SIZE 50.8mm / 2" Titanium
HF POWER (CONTINUOUS RMS) 50W
HF SENSITIVITY (FREE FIELD 1W @ 1M) 104dB
HF VOICE COIL 50.8mm / 2"
HF WAVEGUIDE TYPE Elliptical
HF WAVEGUIDE EXIT 35.6mm / 1.4"
HF DIAPHRAGM MATERIAL Titanium
HF VOICE COIL FORMER MATERIAL Kapton
HF MAGNET STRUCTURE MASS 1.197Kg / 2.63lbs
HF MAGNET STRUCTURE MATERIAL Ferrite
HF PROTECTION SK3
ENCLOSURE MATERIAL & THICKNESS 15mm Plywood
ENCLOSURE FINISH RHINO ROCK?
GRILLE MATERIAL & FINISH 1.5mm Steel
RIGGING POINTS M10 X 6
RIGGING POINT MAX RATED WEIGHT 450kg / 992lbs
POLE MOUNT Dual-Angle (0° or -10°)/ 35 mm Pole Socket
HANDLES 2 On Sides
INPUT CONNECTOR TYPE 2x Speakon
NET WEIGHT 29.9Kg/ 65.9lbs
GROSS WEIGHT 35.5Kg/ 78.1lbs
H 700mm / 27.6"
W FRONT/REAR 446/281.4mm /17.6/11.1"
D 406mm / 16"
H 803mm / 31.6"
W FRONT/REAR 622mm / 24.5"
D 498mm / 19.6"
NOMINAL IMPEDANCE (OHMS) 8Ω
SYSTEM TYPE 2-Way
FREQUENCY RESPONSE (+/- 3DB) 50-20KHz
DB (1W @ 1M) 98dB
Collection only for obvious reasons