Im having a bit of trouble with my washing machine.
I have a Hotpoint Aquarius WF740 and last week in the frost the waste pipe on the sink froze but my wife went and started the washer which is connected to it and it filled the sink and over kitchen floor.
Cleaned it up and my wife turned it on the next day and she said there was a bang and it went off.
I changed fuses in isolator switch and plug then it came on and the LED display seemed to be working ok ,but every setting i choose it never starts and after about 2 minutes it flashed the word "DOOR"
so i have just bought a "door interlock switch" and it was exactly the same.
So now what ive done is unplug the new switch altogether and on the 3 pin cable i have bridged pin 2 and 3 to see if it sends a door locked signal to the washer
So i turned it on and the door locked light lit up straight away but on every setting a choose i starts for about 2 seconds then the pump starts pumping out while the LED flashes "END" quickly then go's onto error F-01.
and if i leave it the pump stops after a couple of minutes while the error code continues to flash.
Hope there might be someone on here who knows a little about washing machine,cheers