bmw 320D M sport remote probs - HotUKDeals
We use cookie files to improve site functionality and personalisation. By continuing to use HUKD, you accept our cookie and privacy policy.
Get the HUKD app free at Google Play

bmw 320D M sport remote probs

ADZ1478 Avatar
7y, 8m agoPosted 7 years, 8 months ago
wife has lost one of the remore fobs for her car 55 reg. I have boght another off ebay in the hope that I can get it re-programmed. Does anyone know how to do it, so it works the same as the one she has left
Thanks all
Other Links From BMW:
ADZ1478 Avatar
7y, 8m agoPosted 7 years, 8 months ago

All Comments

(4) Jump to unreadPost a comment
My dad's BMW dealer lost one fob to his 320 D (57) and had to send off to germany for a replacement, I would have thought if they could have done it they would have - as it would have been a lot quicker than waiting for a whole week.

Obviously there may be dodgy people around that may be able to help.
1 Like #2
Method 1:

1. Working from within the vehicle and with the doors shut

2. Turn ignition to position 1 and back to off within 5 seconds.

3. Remove the key from ignition and press and hold the unlock button for 15 seconds during this time press the key lock button 3 times within 5 seconds.

4. Release both buttons.

5. Doors will lock and unlock to show correct programming has occurred.

Method 2:

To do this procedure you need to have one working key and one key that needs to be programmed.

1) Get in and close all doors.

2) Turn on the ignition and turn off quickly. (No more than 5 seconds) to start the process. Next action must take place within 30 seconds.

3) Remove the 1st key.

4) Hold the key up near your left shoulder (this is so it is closer to the remote receiver antenna.

5) Hold down the unlock button and press the lock button 3 times. Release the unlock button and the doors lock which confirms the operation.

6) Quickly repeat steps 4 & 5 for key #2 etc.

If it does not work, try doing the keys in opposite order. Key 2 then key 1, vs 1 then 2.

Method 3:

Alternate if you do not have a working remote

1. Turn key to position 1 five times very quickly 2. Remove key 3. Hold unlock button then press lock button 3 times, release unlock button.

4. If you have another key do the same button pressing within 30 seconds 5. Turn on ignition to finalise.

PLEASE NOTE: This programming procedure programs the remote control part of the key. Any transponder chip for the immobiliser (starting of car) will not be programmed and must be done by a specialist.
thats not working,checked on my audi,somebody wrote that will be easy,
after I went to Locksmiths ,they couldn't even cut the key as metal was to strong,
so finally you will have order one from dealer,
good luck
1 Like #4
Thank you method 1 worked saved me having a trip to bmw garage fab x

Post a Comment

You don't need an account to leave a comment. Just enter your email address. We'll keep it private.

...OR log in with your social account

...OR comment using your social account

Thanks for your comment! Keep it up!
We just need to have a quick look and it will be live soon.
The community is happy to hear your opinion! Keep contributing!