Help Wiribng front panel plaease! - HotUKDeals
We use cookie files to improve site functionality and personalisation. By continuing to use HUKD, you accept our cookie and privacy policy.
Get the HUKD app free at Google Play

Search Error

An error occurred when searching, please try again!

Login / Sign UpSubmit

Help Wiribng front panel plaease!

Antj87 Avatar
9y, 8m agoPosted 9 years, 8 months ago
http://www.chokdeeyork.com/ant.JPG


MSI REMINDS YOU
If you dont want to connect to the front audio header,pins 5 &6, 9&10 have to be jumped in order to have a signal output directed to the rear audio ports. otherwise, the lineout connector on the back will not be functional

tia!
Antj87 Avatar
9y, 8m agoPosted 9 years, 8 months ago
Options

All Comments

(21) Jump to unreadPost a comment
Comments/page:
#1
what connectors go where!!!!!!!!!!!!!!!!!

the bottom half is the wires! from front panel

the top bit is mobo book diagram!
#2
looks like something from indiana jones to me :?
#3
[SIZE=2]The plug on the end of the audio connector (coming from the front panel on the case) is usually marked with GND, VCC etc. so you know where to plug it in onto the mobo.[/SIZE]
[SIZE=2][/SIZE]
[SIZE=2]It shouldn't be as complicated as it first appears.[/SIZE]
[SIZE=2][/SIZE]
#4
they are all seperate!!!

lol if it was 1 block id be ok!!

anyone help me!!!
#5
Do all the separate cables not have written on the end (the end that plugs into the MOBO) what they are? On my computer, each cable had GND, VCC etc. on it so all you had to do was work out which pin on the actual motherboard corresponds to the diagram.
#6
Also have you located the pins on the mobo itself that are for front panel audio?
#7
look at the pic in first post

bottom half is what cables i have and what they say on them and top is the mobo fdiagram

yer i found it on acctuall mobo!
#8
not sure I'm afraid then.

what make is the case (or front panel)?

Perhaps the manufacturer has details on their website.
#9
i dunno it!

lol just pccase! all the box had on
#10
ok well at a guess...

* these may be the other way round

AUD_GND connects to G
AUD_MIC connects to mic in *
AUD_MIC_BIAS connects to mic power *

by the looks of it the speaker plugs won't connect on as the plug ends, so you may have to pull the plastic block off the end and stick the individual pins on. you may then be able to get the speakers to work with a bit of trial and error.

note: i think only one of the speakers needs to connect to AUD_VCC (so the corresponding pin from the other speaker's wire will not be used).
#11
Were you drunk when you wrote the title to this thread??
#12
Ian182
Were you drunk when you wrote the title to this thread??


it Does helep if you are durunk to reead it, hiis front panel has a wiribng prolbem - got it :w00t: rihgt. :roll:
#13
no just in a rush i tried to change it but it wont!

dont post unless its helpful!
1 Like #14
Well I've pretty much saturated the advice I can provide.
#15
Antj87
dont post unless its helpful!


Helpful
#16
lol

helpful
#17
Pin 1 = Mic In
Pin 2 = Ground
Pin 3 = Mic Power
Pin 4 = Not Connected
Pin 5 = Audio Right
Pin 6 = Audio Right Return
Pin 7 = Not Connected
Pin 8 = Not Present
Pin 9 = Audio Left
Pin 10 = Audio Left Return

Simple.
#18
Browni
Pin 1 = Mic In
Pin 2 = Ground
Pin 3 = Mic Power
Pin 4 = Not Connected
Pin 5 = Audio Right
Pin 6 = Audio Right Return
Pin 7 = Not Connected
Pin 8 = Not Present
Pin 9 = Audio Left
Pin 10 = Audio Left Return

Simple.
Yes that's the simple bit. But the cables to his front panel aren't labelled for the pin they connect to.
#19
well that is how i got em now i think!

and its not working unless the device has seperate power!
#20
markwills
Yes that's the simple bit. But the cables to his front panel aren't labelled for the pin they connect to.

Don't get me wrong, but if they aren't labelled, why has he got them on his original picture post?
#21
Antj87
well that is how i got em now i think!

and its not working unless the device has seperate power!

That's because your case does not support powering the speakers...

The VCC connection is for powering, but the cables you have from the case don't have that option.

Post a Comment

You don't need an account to leave a comment. Just enter your email address. We'll keep it private.

...OR log in with your social account

...OR comment using your social account

Thanks for your comment! Keep it up!
We just need to have a quick look and it will be live soon.
The community is happy to hear your opinion! Keep contributing!