I currently have the following equipment:
Evesham V32EMRO-ZE3 LCD TV
Thomson DHD4000 PVR
Sony DAV-S400 DVD Player
Telewest cable box (absolute min package)
I've just bought a Bush DVR 3004 so that I can archive stuff off my Thomson DHD4000 & also record Sky 1 from my Telewest box.
Problem I seem to have is with setting up & hope someone can give advice.
Current set up is:
Telewest box TV out to Scart 2
RF input to Thomson > Thomson to TV RF
Thomson TV out to Scart 1
Sony to Video In (Red/White/Yellow)
My initial attempt was to:
RF from Thomson to Bush DVD recorder & then to TV
Telewest video scart out to Scart in on Bush
Bush Scart out to TV scart 1 (Just to see if works as I think I will need a scart switch)
Can watch a DVD from Bush doing this. However after running set-up on bush it says picked up 6 channels but TV screen is just green fuzzy lines on Scart 1
Also if switch on Telewest I can hear sound perfectly but same green fuzzy lines, although if switch to Scart 2 - No problems.
Tried again running RF direct to Bush first, Then Thomson & then TV but still no TV picture from Bush.
I believe that because I only have 2 Scarts on TV & want to input 3 & because only have 1 video scart in on Bush & want to input 2 sources - I will need 2 scart switches?
Sorry for such a long post but hopefully someone can help :)