Help with Sky remote code for new TV - HotUKDeals
We use cookie files to improve site functionality and personalisation. By continuing to use HUKD, you accept our cookie and privacy policy.
Get the HUKD app free at Google Play

Search Error

An error occurred when searching, please try again!

Login / Sign UpSubmit

Help with Sky remote code for new TV

ficosaneil Avatar
8y, 7m agoPosted 8 years, 7 months ago
Hi Guys,

I recently got this Tv -> (Link below) via this thread -> (Link Below) but cannot for the life of me get the sky remote to work with it.

The general consencus of opinion is that the code is 1992, however, I go through the procedure to program using the 4 digit code.

1) Switch on the TV
2) Press the TV button on the Sky Remote
3) Hold down the select and red buttons for 2-3 seconds until the LED blinks twice
4) Press the TV button on the Sky Remote again
5) Enter the 4 digit code for your make of TV
6) The LED should blink twice, if not recheck the 4 digit code used and go back to 1
7) Press the standby button on the Sky Remote (The TV should go to standby)
8) Press select to store this setting
9) If the TV does not go into standby press the TV button then the standby button, then TV then standby, keep repeating this until successful. This will scan the codes used for a particular make of TV.

I can get it to blink twice (6) but only if I miss (4) out, then when I get to step (7) it doesn't do anything.......
Tags:
ficosaneil Avatar
8y, 7m agoPosted 8 years, 7 months ago
Options

All Comments

(8) Jump to unreadPost a comment
Comments/page:
#2
just search for the code using the remote.

press tv, then hole select and red until the blinks, then press tv then off repeatedly until the tv turns off then press select to store the code.
#3
wow, is there a chance i'll be doing this hundreds of times?
#4
a small one... its never took me that long though
#5
Nice one, i'll give it a go tonight!
#6
when doing this on your remote dont point it at the telly, cover the end of the remote with you hand or better still leave the room. also double check you have the right code.
#7
Reset the Sky remote control:
1. Point the Sky Remote Control away from the TV and press the tv button.
2. Press and hold down the select and red buttons simultaneously until the red light at the top of the Sky remote control flashes twice.
3. Press the numbers 9, 9, 9.
The red light at the top of the Sky Remote Control should flash twice.

If it does not flash twice, please try the above procedure again.

Locate the codes for your TV:
1. Press the interactive button on your Sky remote control.
2. Highlight Sky Customer Services using the up/down arrows and press select.
3. Highlight Technical Help by pressing the right arrow button twice and press select.
4. Highlight Why doesn't my Sky Remote Control my TV and press select.
5. Follow the on-screen instructions to determine the codes for your make of television. 6. Now follow the process to reprogramme your Sky Remote Control.

Sky Remote Control Unit Programming Procedure:
1. Select any channel on the TV and point the Sky Remote Control away from the TV.
2. Confirm the version of the Sky Remote Control by removing the battery cover.

If there is no sticker inside then it is older than a version 4 therefore disregard the leading ‘0’ and ensure that the select button is pressed after entering the 3 digit code.

3. Press the tv button then press and hold down the select and red buttons simultaneously until the red light at the top of the Sky Remote Control flashes twice.
4. Input the 3 or 4 digit number.
5. Point the Sky Remote Control at the TV and try the volume button, if this works try the other TV functions.
6. Press the Sky button to return to the Sky mode to operate the set top box.

If you are still unable to control your TV, please try the above procedure again.

If all the codes registered for the chosen brand have been tried without success then, unless a Sky Remote Control previously controlled the same TV (faulty Sky Remote Control? Dead batteries?), it is likely that the model of TV is not supported.
#8
cazzzy
when doing this on your remote dont point it at the telly, cover the end of the remote with you hand or better still leave the room. also double check you have the right code.


What hope can I have of turning the TV to stand by if I am not pointing the remote at the TV??

Post a Comment

You don't need an account to leave a comment. Just enter your email address. We'll keep it private.

...OR log in with your social account

...OR comment using your social account

Thanks for your comment! Keep it up!
We just need to have a quick look and it will be live soon.
The community is happy to hear your opinion! Keep contributing!