How to test a GFX card when my PSU is naff - HotUKDeals
We use cookie files to improve site functionality and personalisation. By continuing to use HUKD, you accept our cookie and privacy policy.
Get the HUKD app free at Google Play

Search Error

An error occurred when searching, please try again!

Login / Sign UpSubmit

How to test a GFX card when my PSU is naff

Paddy_o_furniture Avatar
6y, 9m agoPosted 6 years, 9 months ago
I done a favour for a friend of a friend today, didn't do it for reward but he insisted I took a Gigabyte GTX280 1GB DDR3 for my time, he said he's pretty sure it works but he can't be 100% sure. It looks immaculate from the box everything is there, he said it was better than my 8800 in my PC at the moment, I'm not a big games player on my PC use my xbox for that.
My tower has a paltry 350w PSU in it, I'm guessing that this card will need a bit more oomph than that, anyway I can test it, without buying a new PSU for which I may have no need.
Tags:
Paddy_o_furniture Avatar
6y, 9m agoPosted 6 years, 9 months ago
Options

All Comments

(51) Jump to unreadPost a comment
Comments/page:
Page:
#1
you will need at least a 700w, really depends on the spec of system
#2
wickedteen;8339989
you will need at least a 700w, really depends on the spec of system

Q6600, 4gb DDR2 ram, 8800gt runs fine with 350w at moment
1 Like #3
1.2. Minimum System Requirements
• Hardware
- 500-watt power supply or greater with minimum 12V current rating of 36A. (Note 2)
- Intel® Pentium®/CoreTM 2 or AMD AthlonTM/PhenomTM
- 512 MB of system memory; 2 GB or more for best performance
- Optical drive for software installation (CD-ROM or DVD-ROM drive)
• Operating System
- Windows® Vista
- Windows® XP with Service Pack 2 (SP2)
- Windows® XP Professional x64 Edition
• SLI TM Configuration
If you are planning on using this graphics card as part of an SLI system, the following
are required:
- An SLI certified motherboard with two/three PCIe x16 slots and correct chipset driver
- Two GV-N28-1GH-B for SLI configuration;
Three GV-N28-1GH-B for 3-way SLI configuration
- A power supply with 900-watt or above is recommended
- An SLI bridge connector or 3-way SLI bridge connector
#4
sell it? its worth a wee bit.
#5
Maximum GPU Temperature (in C) 105 C
Maximum Graphics Card Power (W) 236 W
Minimum Recommended System Power (W) 550 W
Supplementary Power Connectors 6-pin & 8-pin
#6
so the card needs a min of 500w, so with the rest of your setup best to go with a 700w, best to have more then not enough
#7
shanecr;8340027
sell it? its worth a wee bit.

Can't till I know 100% it's working, was stunnded when I relaised how much they are worth. Wasn't expecting nothing
#8
Could he remove all devices attached, dvd drives, sound cards and any nonessential components and test


my system with a gtx280 from the powersupply calc below was 273w

http://extreme.outervision.com/PSUEngine
#9
antony4462;8340060
Could he remove all devices attached, dvd drives, sound cards and any nonessential components and test


my system with a gtx280 from the powersupply calc below was 273w

http://extreme.outervision.com/PSUEngine

Will give that a try, just try and boot with evertyhing inc USB stuff disconnected
#10
The card doesn't need a min of 500w, the card inside a system needs a min of 500w. So a PSU between 500-600W should be perfectly fine for the entire system.

The more pressing concern is the connection required to power the card. The 6pin/8pin connections.

http://www.techpowerup.com/reviews/Zotac/GeForce_GTX_280_Amp_Edition/images/power.jpg

Don't even bother trying to fire up this card without those two power plugs in, chances are it will just beep loudly and display nothing.
1 Like #11
I wouldn't recommend trying it with out a recommendation of a true tech off here,
#12
PhearFactor;8340080
The card doesn't need a min of 500w, the card inside a system needs a min of 500w. So a PSU between 500-600W should be perfectly fine for the entire system.

The more pressing concern is the connection required to power the card. The 6pin/8pin connections.

http://www.techpowerup.com/reviews/Zotac/GeForce_GTX_280_Amp_Edition/images/power.jpg

Don't even bother trying to fire up this card without those two power plugs in, chances are it will just beep loudly and display nothing.

It's got funny adapter things in the box
#13
Guessing he wants to sell the graphics card tested not untested :)
1 Like #14
faulty one on ebay recently sold for almost £90
#15
Paddy_o_furniture
It's got funny adapter things in the box


You could have a go, personally though I would just get a better PSU before trying. Or find someone who can test it for you. I am not sure what could happen, but.. I am not going to scare you, but yeah, I hope the PSU is good quality, chances are it will just go pop lol
#16
dcx_badass;8340102
700w lol, no way. 550w will be fine, that's what they recommend and they normally exagerate the ratings. No way to test it without a better PSU really. Just get one for like £50 from ebuyer. That card is high end and is much better than a 8800 and definately worth using depending on the rest of your PC.

Will try see if a mate has decent enough PSU
antony4462;8340135
Guessing he wants to sell the graphics card tested not untested :)

Undecided as to what to do with it, may start playing games on my PC if this would make it worthwhile.
This is whats in the box:
http://img338.imageshack.us/img338/889/sdc15622.jpg
http://img11.imageshack.us/img11/8578/sdc15621.jpg
1 Like #17
Do you have a spare psu lying about? You could connect that one as extra and run it solely to the psu, on the atx connector just short the green and black to start the psu running.
#18
PhearFactor;8340151
You could have a go, personally though I would just get a better PSU before trying. Or find someone who can test it for you. I am not sure what could happen, but.. I am not going to scare you, but yeah, I hope the PSU is good quality, chances are it will just go pop lol

PSU is a standard HP/Liteon one, have a spare.
#19
harlzter;8340173
Do you have a spare psu lying about? You could connect that one as extra and run it solely to the psu, on the atx connector just short the green and black to start the psu running.

I have the exact same PSU spare that is in my PC. No idea where it came from
1 Like #20
The molex to 6pin/8pin do work, although it is recommended to use a power supply with those connections rather than using the adapters. It is possible that it could work, it really depends on the amps and such of the PSU. If you cannot get someone else to test it for you and you don't mind risking the PSU, then for sure, have a go.

Or if you can post the specs of the PSU, I can tell you how safe you are lol

You are looking for a label like this:
http://benchmarkreviews.com/images/reviews/power/Hiper%20HPU-4M730-SS/label.jpg
#21
PhearFactor;8340191
The molex to 6pin/8pin do work, although it is recommended to use a power supply with those connections rather than using the adapters. It is possible that it could work, it really depends on the amps and such of the PSU. If you cannot get someone else to test it for you and you don't mind risking the PSU, then for sure, have a go.

Or if you can post the specs of the PSU, I can tell you how safe you are lol

You are looking for a label like this:
http://benchmarkreviews.com/images/reviews/power/Hiper%20HPU-4M730-SS/label.jpg

this the right info?
I have 2x of these
DC OUTPUT 350W
INPUT 100-127v /10A 50 - 60 Hz
200-240v /5A 50 - 60 Hz

OUTPUT +5v /18A MAX
+5v /2A MAX

+12VB /18A MAX
-12V /0.8 MAX
#22
Your CPU needs about 10amp I believe and the GPU will require around 30, your PSU has 36A over the two 12v rails. So there is a chance it could post, but I would not recommend you loading into Windows/running any games. So in theory, even though you will be able to see the card working, you will not actually be able to test it properly.
1 Like #23
With 18A don't' hold much luck of it working watch it don't pull ya psu down though.
#24
PhearFactor;8340254
Ugh 18A is really low, I think if you stress tested your current system you would actually find the PSU is not actually capable of powering what you have now (would become unstable under heavy load/usage). So you really need to upgrade the PSU anyway.

It's never been touched, it's how I bought it from HP.
#25
http://tinyurl.com/ybsl9f2jus7t found this PSU in my daughters comp, any better?
#26
Paddy_o_furniture
It's never been touched, it's how I bought it from HP.


Yeah I miscalculated as the PSU has two rails. Anyway.. from my post above:

Your CPU needs about 10amp I believe and the GPU will require around 30, your PSU has 36A over the two 12v rails. So there is a chance it could post, but I would not recommend you loading into Windows/running any games. So in theory, even though you will be able to see the card working, you will not actually be able to test it properly.

You want a PSU with more than 40A on the 12V rail(s), that would be ideal, also it should really be 450W or more. This is as low as I would go.
#27
PhearFactor;8340298
Yeah I miscalculated as the PSU has two rails. Anyway.. from my post above:

Your CPU needs about 10amp I believe and the GPU will require around 30, your PSU has 26A over the two 12v rails. So there is a chance it could post, but I would not recommend you loading into Windows/running any games. So in theory, even though you will be able to see the card working, you will not actually be able to test it properly.

You want a PSU with more than 40A on the 12V rail(s), that would be ideal, also it should really be 450W or more. This is as low as I would go.

I'll try it at a mates this week, if it works I'm gonna keep it I think. Will I notice much of a difference as opposed to the 8800 I go at the moment.
#28
Paddy_o_furniture
I'll try it at a mates this week, if it works I'm gonna keep it I think. Will I notice much of a difference as opposed to the 8800 I go at the moment.


Do you know what 8800 card you have?

Is it a GT/GTS and how much memory does it have 256/512/320/640MB
#29
8800gt 1gb
#30
It is an excellent upgrade, although I guess it does depend on what sort of set-up you have for gaming on. Monitor size and such - there is a good chance it is overkill for your needs. It might be more worthwhile to sell it while it is worth something as in another 6 month it will probably be a lot cheaper than it is now.

If your are a gamer and plan to use it on a monitor 22" or bigger, then keep it. If not, sell it as soon as possible.
#31
You will be fine testing with both PSU's. Leave one as normal and it will supply the CPU (105w/8.75A) and the PCI-E x16 slot (75w/6.25A) and you boot drive. Then connect the 8+6 pin to the other PSU.
#32
PhearFactor;8340412
It is an excellent upgrade, although I guess it does depend on what sort of set-up you have for gaming on. Monitor size and such - there is a good chance it is overkill for your needs. It might be more worthwhile to sell it while it is worth something as in another 6 month it will probably be a lot cheaper than it is now.

If your are a gamer and plan to use it on a monitor 22" or bigger, then keep it. If not, sell it as soon as possible.

I got a 22" (HDMI/DVI) benq most action it sees is championship manager. Could fancy gaming more on the PC as the missus hogs the bloody telly
#33
GAVINLEWISHUKD
You will be fine testing with both PSU's. Leave one as normal and it will supply the CPU (105w/8.75A) and the PCI-E x16 slot (75w/6.25A) and you boot drive. Then connect the 8+6 pin to the other PSU.


You best explain how he powers up the other PSU :p
#34
GAVINLEWISHUKD;8340441
You will be fine testing with both PSU's. Leave one as normal and it will supply the CPU (105w/8.75A) and the PCI-E x16 slot (75w/6.25A) and you boot drive. Then connect the 8+6 pin to the other PSU.

It's gonna be a squeeze getting into my tower looking at it, BRB gonna give it a go with the 2 PSU's.
Edit will have to wait till daughter is finished as need her kettle lead
#35
Paddy_o_furniture
It's gonna be a squeeze getting into my tower looking at it, BRB gonna give it a go with the 2 PSU's.


You don't need to get them both into the system, you can leave one on the floor and just hook up the molex adapters to the 8pin/6pin plugs and pop them in. The problem is you will have to join the green and black cables to make the PSU boot.

http://lib.store.yahoo.net/lib/directron/2psfig7large.jpg

I have used this approach before, but never on a GPU so.. yeah, be sure to tell me what happens if you do it :whistling:
#36
PhearFactor;8340483
You don't need to get them both into the system, you can leave one on the floor and just hook up the molex adapters to the 8pin/6pin plugs and pop them in. The problem is you will have to join the green and black cables to make the PSU boot.

http://lib.store.yahoo.net/lib/directron/2psfig7large.jpg

I have used this approach before, but never on a GPU so.. yeah, be sure to tell me what happens if you do it :whistling:

I meant getting the card into my tower as it's micro ATX, and cramped at the minute. Give it a go soon.
That sounds arsey it's not meant too
#37
Paddy_o_furniture
I meant getting the card into my tower as it's micro ATX, and cramped at the minute. Give it a go soon


Oh hehe, yes those GTX cards are pretty long. If it won't fit don't force it, those PCB's are not that sturdy. I have a few bent cards here lol
1 Like #38
PhearFactor
You best explain how he powers up the other PSU :p


PhearFactor
You don't need to get them both into the system, you can leave one on the floor and just hook up the molex adapters to the 8pin/6pin plugs and pop them in. The problem is you will have to join the green and black cables to make the PSU boot.

http://lib.store.yahoo.net/lib/directron/2psfig7large.jpg

I have used this approach before, but never on a GPU so.. yeah, be sure to tell me what happens if you do it :whistling:


Well you have answered this already! Though I have it in my head it was the grey wire. I'm not sure was a long time ago would need to look it up first. But could well be the green.:thumbsup:
#39
GAVINLEWISHUKD
Well you have answered this already! Though I have it in my head it was the grey wire. I'm not sure was a long time ago would need to look it up first. But could well be the green.:thumbsup:


Any idea how a GPU behaves when it is being fed power via the 6pin/8pin but not through the PCI-E slot?

The only way I see this working is if he powers on with the 6/8pin already connected and running, problem is I have no idea if this is safe or not. I could be wrong, but if he boots up before firing up the second PSU, chances are the card will beep and refuse to post due to the lack of the extra power plugs. It is going to be hard doing it at the same time, but not impossible lol

I do not envy the OP :w00t:
#40
PhearFactor;8340541
Any idea how a GPU behaves when it is being fed power via the 6pin/8pin but not through the PCI-E slot?

The only way I see this working is if he powers on with the 6/8pin already connected and running, problem is I have no idea if this is safe or not. I could be wrong, but if he boots up before firing up the second PSU, chances are the card will beep and refuse to post due to the lack of the extra power plugs.

I just had a plan, CEX can test it for me. Before I don't sell it to them??
I'll be in town tomorrow and not far from one. I'm not obliged to sell it after they have tested it am I?

Post a Comment

You don't need an account to leave a comment. Just enter your email address. We'll keep it private.

...OR log in with your social account

...OR comment using your social account

Thanks for your comment! Keep it up!
We just need to have a quick look and it will be live soon.
The community is happy to hear your opinion! Keep contributing!