Windows 7 Partition Help - HotUKDeals
We use cookie files to improve site functionality and personalisation. By continuing to use HotUKDeals, you accept our cookie and privacy policy.
Get the HotUKDeals app free at Google Play

Search Error

An error occurred when searching, please try again!

Login / Sign UpSubmit

Windows 7 Partition Help

£0.00 @
Ok heads in bits with this one im just getting the gist of windows 7 so i fancied a fresh wipe. Installed my copy of 7 on my computer i have 2 partitions one is sata for the windows 7 and one is an in… Read More
Dannysubaru Avatar
6y, 5m agoPosted 6 years, 5 months ago
Ok heads in bits with this one im just getting the gist of windows 7 so i fancied a fresh wipe. Installed my copy of 7 on my computer i have 2 partitions one is sata for the windows 7 and one is an internal hard drive 1TB now im struggling to get it to use the 1TB As the main drive for example i cant drag anything from my external to my pc desktop as it says my memory is low due to it trying to by default store the stuff on the 30GB Drive. i was told that it makes the computer run a lot faster if i keep the drives seperate (one for windows and one for storage. any help guys?
Dannysubaru Avatar
6y, 5m agoPosted 6 years, 5 months ago
Options

All Comments

(13) Jump to unreadPost a comment
Comments/page:
#1
Can you post a picture similar to this to explain your situation?

http://www.lytebyte.com/wp-content/uploads/2008/05/disk-management-in-vista1.jpg

If you dont know how to get to these pages (disk management) you can find out more here
#2
#3
Lazy way is to get it to unplug all but the 1tb. What motherboard are you using, sometimes you need to load additional drivers after putting the windows DVD in to get the installation sequence to detect the drive. (Edit: okay I read it as you wanted to install windows on it).

To make the file swap go to the 1tb drive, right click my computer, click advanced system settings, select advanced tab, click settings under performance - go to advanced tab, click change. Click no paging file, then select the 1tb drive, select custom size, and type in a nice figure in initial and maximum size, say 4219mb in both. Click ok on everything and reboot.

Edited By: anewman on Feb 19, 2011 03:45
#4
Right, so you have installed to your 30GB drive but its too small?

Did you do this on purpose? Is it an SSD or something?
#5
PhearFactor
Right, so you have installed to your 30GB drive but its too small?

Did you do this on purpose? Is it an SSD or something?


no its an ocz-onyx ata internal that i installed windows 7 to
#6
Right so it is an SSD, can you show us a picture of the message/error "my memory is low" that you talked about in the original post?
#7
PhearFactor
Right so it is an SSD, can you show us a picture of the message/error "my memory is low" that you talked about in the original post?


it just says there is not enough disc space on desktop. you will need an additional 11.2GB

in a box
#8
Can you give us the spec. of the rest of the machine. How much memory in particular (2GB/4GB etc)?

Also have you changed the virtual memory setting at all?

Edit: Is the message popping up all the time, as soon as you start windows or when you try to do something, launch a program?

Edited By: PhearFactor on Feb 19, 2011 03:55
#9
PhearFactor
Can you give us the spec. of the rest of the machine. How much memory in particular (2GB/4GB etc)?

Also have you changed the virtual memory setting at all?


havent touched a thing mate when installing just created 30GB SSD as the main partition and left the internal hdd unallocated then created a partition with it in windows partition creator
#10
http://www.vistax64.com/tutorials/132201-virtual-memory-paging-file-change.html

Have a look here, can you tell me how this is set up? Is it being managed by windows, what are the numbers, etc (minimum/recommended/allocated)?

Should have information for both drives there, C: and D:

Edited By: PhearFactor on Feb 19, 2011 03:59
#11
my specs fine mate nothing low on it its brand new i have 4 2.00GB RAM Chips installed

Pc Rating is a 5.1 and the only reason its that low is because i got a crappy graphics card due to lack of pc gaming
#12
Try the page file bit I posted above and see what it says. Also, is the message popping up all the time, or is trying to do something (install windows updates for example?)

I am not 100% sure if it could be page file related or not, if there is no page file set then it could cause problems. System Restore related also? Something else you should probably check (using disk space that you would prefer not to be used).

I think it could be just the generic low space warning message, which is something I guess you are going to have to accept because its only a small drive. The message would be caused by updates, software, etc or it could be just one of those early warnings from Windows. You can disable the warning message completely, you can find the guide here.



Edited By: PhearFactor on Feb 19, 2011 04:48: .
#13
according to disk management you only have 7GB free on c:, so why are you trying to copy a 12GB file/s to it?

with 8gb of ram windows will create a 12GB swap(page)file so you need to disable your swapfile as explained above, also disable hibernbate as this will be 8GB of disk space used as well.
in a command prompt type
powercfg -h off
then press enter
also turn off system restore on the c: drive(clear all restore points first), and disable the volume shadow copy service.
the downside to ssds, they are not straight forward to use at their best.

Edited By: maddogb on Feb 19, 2011 08:29

Post a Comment

You don't need an account to leave a comment. Just enter your email address. We'll keep it private.

...OR log in with your social account

...OR comment using your social account

Thanks for your comment! Keep it up!
We just need to have a quick look and it will be live soon.
The community is happy to hear your opinion! Keep contributing!