Same deal as a few months ago. £15.99 each, 29.99 for two or 42.99 for 3.
I bought two last time, they were simple to setup and no config needed. They are fantastic and work much better than my previous wireless setup.
here are the direct links (thanks to andycnovowel)
Some blurb from 7 day shop
This 200M Powerline Adapter can provide the transmission of broadband data service via power line, which are suitable for use in a wide range of both residential (in-home) and commercial (offices, apartments, hotels, warehouses) network applications in which existing power lines can be utilized. There is never any need to install new wires. These adapters enable the effortless creation of a high-speed network that supports video, voice and data.
Ideal for use with internet enabled TV's such as Samsung / Sony Bravia / Panasonic Viera and many more digital media devices, game consoles, print servers, computers, and network storage devices throughout your home, where there is requirement for high-quality data transmission through Ethernet connection.
Easy Plug-N-Play operation, No configuration required.
Power save mode automatically reduces power consumption.
Protocol Supports HomePlug AV 1.0
EEE 802.3 10/100 Ethernet (100Mbps)
EEE 802.3u Fast Ethernet
Co-exists with existing HomePlug 1.0
Windows 98SE, 2000, ME, XP 32/64 bit ,Vista 32/64bit,Windows7 32/64bit
PLC Rate 200Mb
Data Rate- TCP/UDP 65Mbps TCP 90Mbps UDP
Modulation Band 2-30MHz
Modulation Schemes Supports256/64/16/8-QAM, QPSK,BPSK and ROBO
Encryption 128 AES
QoS Support contention-free access, four-level priority based contention access, and multi segment bursting Support VLAN Priority Support ToS and CoS Packet Classifier
Work Mode TDMA and priority based CSMA/CA
Multicast Support Supports IGMP managed multicast sessions
SNMPv2 or v3 Support
Typical Coverage Up to 5000 square foot home The actual Coverage will vary with the power grid and the number of PLC terminal devices.
LED’s Power Ethernet: Ethernet Link and Activity Data: PLC Link and Activity
Push Button RESET: Restore the default factory parameter NMKSET: Set up network password automatically
Ethernet Interface 1 x RJ45 for 10/100 Ethernet (Auto MDI/MDI-X)
Environment Requirement Operating Temperature 0º to 45º C Storage Temperature -20 º to 70 º C Operating Humidity 10% to 90% Non-condensing Storage Humidity 5% to 90% Non-Condensing Input Rating 100-240 VAC, 50/60Hz
EMC and Safety Regulatory Compliance FCC Part 15 Class B CE Safety Regulations UL Green Standard RoHS Physical Dimension
Physical Characteristics L×W×H: 82mm*52mm*32mm
Box Includes 1x Powerline adapter 1x RJ45 Network Cable 1m