247°
EXPIRED
Madeira Value Spruce Deck Board £2.00 @ B&Q (T)25mm (W)95mm (L)1800mm *** (Rhyl store, others might have stock too. Don't trust the online stock checker)***.
Madeira Value Spruce Deck Board £2.00 @ B&Q (T)25mm (W)95mm (L)1800mm   *** (Rhyl store, others might have stock too. Don't trust the online stock checker)***.

Madeira Value Spruce Deck Board £2.00 @ B&Q (T)25mm (W)95mm (L)1800mm *** (Rhyl store, others might have stock too. Don't trust the online stock checker)***.

Buy forBuy forBuy for£2
GETGet dealVisit site and get deal
Loads at Rhyl store although the stock checker said not stocked. Might be available at others.

Product Information:

Classic softwood decking, grooved on both sides giving you the option to frame your deck with different textures

Features and Benefits

Made with slow grown spruce for stability and precision finished

Pressure treated to increase longevity

Grooved surface on one side

We recommend you level the ground where you're planning to construct your decking, making sure you compact soil and lay weed control fabric. Use timber joists to support your decking.

Treat your timber decking annually with decking stain, varnish or paint to prolong its life. Lightly sand surfaces and ends to allow treatment to penetrate sufficiently through decking for maximum protection. Ensure surfaces and ends (especially cut ends) are completely sealed.

Technical Specifications:

Individual board thickness\x0925mm

Individual board width\x0995mm

Individual board length\x091800mm

Coverage\x090.171 m²

Material\x09Softwood

Timber type\x09Spruce

Kiln dried\x09Kiln dried

Timber certificate\x09BMT-PEFC-0009

Fitting instructions:

This decking should be laid onto treated deck joists on joist centres of no more than 400mm. If laying diagonally the maximum joist centres should be 300mm

Guarantee\x0910years

Top comments

I wood look at 32mm boards this will distort and warp and be springy. Try your local independent builders/timber merchant they will do a better deal on a better quality product. Use this deal as your bargaining chip. Remember proper builders merchants have 6 or 7 prices loaded up on their screens, ask for T4 which equates to trade 4. the best quantity rate. If you wander in asking loads of questions you will get retail rates (double) this is the reason why builders merchants open on Saturday mornings. Builders don't work weekends!
Research-Be confident in what you want-Get the best price- If you don't ask to see the manager to see if he can do any better.
NEVER NEAR CLOSING TIME, LUNCH OR SATURDAY
also end of the month is a good time when they are looking to achieve targets for bonus, It might be that GP is up but sales are below target
Edited by: "nougat" 11th May
32 Comments

Cheap shelving.

Will look, thanks.

I wood look at 32mm boards this will distort and warp and be springy. Try your local independent builders/timber merchant they will do a better deal on a better quality product. Use this deal as your bargaining chip. Remember proper builders merchants have 6 or 7 prices loaded up on their screens, ask for T4 which equates to trade 4. the best quantity rate. If you wander in asking loads of questions you will get retail rates (double) this is the reason why builders merchants open on Saturday mornings. Builders don't work weekends!
Research-Be confident in what you want-Get the best price- If you don't ask to see the manager to see if he can do any better.
NEVER NEAR CLOSING TIME, LUNCH OR SATURDAY
also end of the month is a good time when they are looking to achieve targets for bonus, It might be that GP is up but sales are below target
Edited by: "nougat" 11th May

They have these in the Leicester Abbey Lane store. But they are only grooved on one side. I believe these in the listing are too, but the description is wrong. You can clearly see on the B&Q website in photo 4 that only 1 side has grooves.

I bought all the stock of these from my local B&Q three years ago. Nothing wrong with them good quality and I've had no issues with them since being put down

Plus much easier to fit in the back of a hatchback

nougat

I wood look at 32mm boards this will distort and warp and be springy. Try … I wood look at 32mm boards this will distort and warp and be springy. Try your local independent builders/timber merchant they will do a better deal on a better quality product. Use this deal as your bargaining chip. Remember proper builders merchants have 6 or 7 prices loaded up on their screens, ask for T4 which equates to trade 4. the best quantity rate. If you wander in asking loads of questions you will get retail rates (double) this is the reason why builders merchants open on Saturday mornings. Builders don't work weekends!Research-Be confident in what you want-Get the best price- If you don't ask to see the manager to see if he can do any better. NEVER NEAR CLOSING TIME, LUNCH OR SATURDAYalso end of the month is a good time when they are looking to achieve targets for bonus, It might be that GP is up but sales are below target



​so i take it you have not bought them then. as i bought these for £2 3 years ago to do some decking around my kids play house and there still solid.

These have been £2 for years I bought some 2/3 years ago & made giant planters out of them rather than paying £60 for ready made planters lol

Used this decking 6 years ago. It's as good as the day it was fitted (been treated regularly).

stevenprior1

so i take it you have not bought them then. as i bought these for £2 3 … so i take it you have not bought them then. as i bought these for £2 3 years ago to do some decking around my kids play house and there still solid.


No I used get reps calling round trying to get me to put some into stock. I succumbed once and got a pack which sold quickly but a lot came back twisted generally the timber mills use up the poorer planks with more knots in it to make the thinner decking boards and sell them cheap to the sheds like B&Q and Homebase knowing full well that most people purchasing from there don't have clue what decent timber is. That isn't a slur on the sheds patronage. I wouldn't have a clue how code in python and wouldn't give any advice on the subject however I do know timber and the way merchants operate which I am sharing with you.
Also get two quotes I forgot to mention that as it just seems obvious to me. Play them against each other, be happy and don't moan. They like people who are happy, they want to make you happy, they want to get the sale rather than the competition. Don't get complacent though. If you get a cracking deal say 40% off retail don't think that everything else like screws, nails timber will all get the same discount, they will try to make it up on high margin screws which is when you bring out your toolstation or screwfix book.
Play the game it's more fun. I tried asking for a better price in homebase to a blank faced kid who thought I was talking another language
If you want look here for an independent there are others of course

nougat

I wood look at 32mm boards this will distort and warp and be springy. Try … I wood look at 32mm boards this will distort and warp and be springy. Try your local independent builders/timber merchant they will do a better deal on a better quality product. Use this deal as your bargaining chip. Remember proper builders merchants have 6 or 7 prices loaded up on their screens, ask for T4 which equates to trade 4. the best quantity rate. If you wander in asking loads of questions you will get retail rates (double) this is the reason why builders merchants open on Saturday mornings. Builders don't work weekends!Research-Be confident in what you want-Get the best price- If you don't ask to see the manager to see if he can do any better. NEVER NEAR CLOSING TIME, LUNCH OR SATURDAYalso end of the month is a good time when they are looking to achieve targets for bonus, It might be that GP is up but sales are below target



I work in a timber merchants, if you come in asking for the "T4" code, you will be looked at in an odd manor and asked what the fudge you are going on about!

Obviously this person is a "retail" customer thinking they know everything when they know nothing!

Ch

nougat

No I used get reps calling round trying to get me to put some into stock. … No I used get reps calling round trying to get me to put some into stock. I succumbed once and got a pack which sold quickly but a lot came back twisted generally the timber mills use up the poorer planks with more knots in it to make the thinner decking boards and sell them cheap to the sheds like B&Q and Homebase knowing full well that most people purchasing from there don't have clue what decent timber is. That isn't a slur on the sheds patronage. I wouldn't have a clue how code in python and wouldn't give any advice on the subject however I do know timber and the way merchants operate which I am sharing with you.Also get two quotes I forgot to mention that as it just seems obvious to me. Play them against each other, be happy and don't moan. They like people who are happy, they want to make you happy, they want to get the sale rather than the competition. Don't get complacent though. If you get a cracking deal say 40% off retail don't think that everything else like screws, nails timber will all get the same discount, they will try to make it up on high margin screws which is when you bring out your toolstation or screwfix book.Play the game it's more fun. I tried asking for a better price in homebase to a blank faced kid who thought I was talking another languageIf you want look here for an independent there are others of course


Cheers for the info.
I just asked for a cheeky reduction in Home base, got a 300quid fruit cage for 30.If U don't ask you don't get as they say,

anyone know where to get bargain for timber wood to build the base for this decking please? I'm building a decking 4.2meter by 4.8meter. got decking ready just to timber wood for base please.

Selco are doing 3.6 125 38mm for £5.49 + vat

mattsimmons144

I work in a timber merchants, if you come in asking for the "T4" code, … I work in a timber merchants, if you come in asking for the "T4" code, you will be looked at in an odd manor and asked what the fudge you are going on about!Obviously this person is a "retail" customer thinking they know everything when they know nothing!


Oi if you work in a timber merchant then STOP putting the prices up on a Saturday just because no builder in the UK works on a saturday then dont penalise me with your priced up in your brochure prices. Thanks

mattsimmons144

I work in a timber merchants, if you come in asking for the "T4" code, … I work in a timber merchants, if you come in asking for the "T4" code, you will be looked at in an odd manor and asked what the fudge you are going on about!Obviously this person is a "retail" customer thinking they know everything when they know nothing!


Ok so correct me and tell me how it works in an independent merchant in your Manor. and when you've been promoted from yardman to sales let us know what margins you are your are looking at "T4" was an example
So.. buy
1 plank you get Retail rate
10 planks you get T1
20 planks you get T2
50 planks you get T3
200 planks you get T4
Whether it is T4,T5,F2,g19 there are always quantity breaks that the guy behind the till can overide to a certain extent before it gets to a point where a manager has to approve or maybe the sales dept rather than the counter staff.
Where do you think my info is coming from as a "retail" customer? (knowing nothing)

I purchased three pieces from Cardiff Gate Warehouse, as I needed three planks to make a bench. The pallet said Product of Latvia.
Edited by: "robertpurvis" 12th May

dereklogan7

Cheap shelving.



Great garden edging also.

I just live B&Q - this deal has boards at £2 each, however they have a 5 pack of the same for £12.50 (http://www.diy.com/departments/madeira-value-deck-board-t25mm-w95mm-l1800mm-pack-of-5/1636364_BQ.prd) buy in bulk and pay 25% more than buying singles

Go figure

Just what I need for some fence repair jobs. A bit wider than I would have liked but at two quid for pressure treated timber, I couldn't care less.

nougat

Ok so correct me and tell me how it works in an independent merchant in … Ok so correct me and tell me how it works in an independent merchant in your Manor. and when you've been promoted from yardman to sales let us know what margins you are your are looking at "T4" was an example So.. buy1 plank you get Retail rate10 planks you get T120 planks you get T250 planks you get T3200 planks you get T4 Whether it is T4,T5,F2,g19 there are always quantity breaks that the guy behind the till can overide to a certain extent before it gets to a point where a manager has to approve or maybe the sales dept rather than the counter staff.Where do you think my info is coming from as a "retail" customer? (knowing nothing)



Would this stuff be OK to make a shed door.700x2000mm And I was thinking a step further, how about a set of double garage doors each Approx 4x6 (feet) the type with side hinges.
Many thanks in advance.

reggy246

Would this stuff be OK to make a shed door.700x2000mm And I was thinking … Would this stuff be OK to make a shed door.700x2000mm And I was thinking a step further, how about a set of double garage doors each Approx 4x6 (feet) the type with side hinges. Many thanks in advance.


Not really you want Shiplap or ptg. This would be a bit heavy and it is 200mm to short.

25mm thick and 95mm wide.
Don't bother there's a reason it's cheap

I imagine one would have to sort through for warped and damaged lengths. Get there early I guess to get the good lengths.

bigweapon07

Oi if you work in a timber merchant then STOP putting the prices up on a … Oi if you work in a timber merchant then STOP putting the prices up on a Saturday just because no builder in the UK works on a saturday then dont penalise me with your priced up in your brochure prices. Thanks



hahaha I can assure you that our prices do not change on a weekend. nor during the week. We have 2 prices a "trade" and "retail". Obviously the trade get the cheaper price!

nougat

Ok so correct me and tell me how it works in an independent merchant in … Ok so correct me and tell me how it works in an independent merchant in your Manor. and when you've been promoted from yardman to sales let us know what margins you are your are looking at "T4" was an example So.. buy1 plank you get Retail rate10 planks you get T120 planks you get T250 planks you get T3200 planks you get T4 Whether it is T4,T5,F2,g19 there are always quantity breaks that the guy behind the till can overide to a certain extent before it gets to a point where a manager has to approve or maybe the sales dept rather than the counter staff.Where do you think my info is coming from as a "retail" customer? (knowing nothing)



I am the "guy behind the till" and all outlet/merchants work differently depending on what sales system they are using.

There is a price for retail and a price for trade.
Obviously on larger orders there is a lot more movement on the discount that can be given. but by how you are saying it its like there is a auto discount on what you buy!
I am unsure where you are getting your info from, probably a forum on "mums net" and as for builders not working weekends, they do!

mattsimmons144

I am the "guy behind the till" and all outlet/merchants work differently … I am the "guy behind the till" and all outlet/merchants work differently depending on what sales system they are using.There is a price for retail and a price for trade.Obviously on larger orders there is a lot more movement on the discount that can be given. but by how you are saying it its like there is a auto discount on what you buy!I am unsure where you are getting your info from, probably a forum on "mums net" and as for builders not working weekends, they do!


Why are you being such an arrogant know it all? The guy was just trying to give people some good advice. Don't know why you feel the need to put him down as from your quote above he was correct. Discounts are available based on quantity. Try sharing your advice instead of belittling others - that's what HUKD is for.

nougat

Not really you want Shiplap or ptg. This would be a bit heavy and it is … Not really you want Shiplap or ptg. This would be a bit heavy and it is 200mm to short.


, thank you for your advice, much appreciated

mattsimmons144

I am the "guy behind the till" and all outlet/merchants work differently … I am the "guy behind the till" and all outlet/merchants work differently depending on what sales system they are using.There is a price for retail and a price for trade.Obviously on larger orders there is a lot more movement on the discount that can be given. but by how you are saying it its like there is a auto discount on what you buy!I am unsure where you are getting your info from, probably a forum on "mums net" and as for builders not working weekends, they do!


Aha "guy behind the till" at a shed by the sound of it. If builders worked Sundays then the Proper builders merchants would have to reply to that demand and open on a Sunday and Saturday afternoons
Like I said before no price is set in stone at a merchants in fact most of them don't display prices which is against the law but not overly policed. so you state in one comment there are only two prices at your tillpoint but then go on to say in your next comment there are other prices available for quantities, so which statement is correct as they contradict each other. Maybe your employer doesn't trust you to manually apply these price breaks what is your personal GP at the moment? any where near bonus this month? I do occacionally look on netmums for parenting advice as it happens but I haven't seen any threads regarding pricing structures at builders merchants. Indecently which buying group does you builders merchant buy through?

Will you guys give it a rest? A mate of mine is a builder, extensions mainly but also garden stuff, and he works every day. Not sure where this builders don't work weekends lark is coming from? As for pricing, every outlet is different. Some give anyone a discount, some are fiercely loyal to the trade side, but nothing is set in stone.

nougat

Ok so correct me and tell me how it works in an independent merchant in … Ok so correct me and tell me how it works in an independent merchant in your Manor. and when you've been promoted from yardman to sales let us know what margins you are your are looking at "T4" was an example So.. buy1 plank you get Retail rate10 planks you get T120 planks you get T250 planks you get T3200 planks you get T4 Whether it is T4,T5,F2,g19 there are always quantity breaks that the guy behind the till can overide to a certain extent before it gets to a point where a manager has to approve or maybe the sales dept rather than the counter staff.Where do you think my info is coming from as a "retail" customer? (knowing nothing)



Relax, haters gonna hate. Those that find your info useful will appreciate it. Others will genuinely believe that that little series of numbers bottom right of a sales screen for example are random when some may suggest it's actually the markup and margin to help the sales guy know how much "price play" they have. If you're after cheap decking then this could be great. If you are more discerning it may pay to explore options and chat to your local Indy store as well. If someone shares their experience, take it. If your experience is different, maybe share that too, but what's wrong with being objective and complimentary? My "cheap " decking is 9 years old and still fine having been treated. However it is springy cos of how I built it and some bits came off in this years pressure wash. Always bargains to be had and the more knowledgeable you are the stronger your position so thanks to all for your tuppences. Remember , no such thing as a sale imo, just a time when retailers are happy to make less money from you....... although I have had deals at less than cost in the past.

My cheap decking made from barge boards lasted 15years the last 5 started to lift the screw were rotting.

djgilbo12th May

anyone know where to get bargain for timber wood to build the base for …anyone know where to get bargain for timber wood to build the base for this decking please? I'm building a decking 4.2meter by 4.8meter. got decking ready just to timber wood for base please.


In wickes, they have some 2400x35x95mm planks that go down to £4.99 each when you buy 5 or more, I'm sure you could rustle soemthing up with this
Post a comment
Avatar
@
    Text