Unfortunately, this deal is no longer available
NETGEAR 5-Port Gigabit Ethernet PoE Netgear Network Switch, Hub, Internet Splitter (GS305P) - with 4 x PoE - 55W - £42.81 from Amazon
236° Expired

NETGEAR 5-Port Gigabit Ethernet PoE Netgear Network Switch, Hub, Internet Splitter (GS305P) - with 4 x PoE - 55W - £42.81 from Amazon

£42.81£50.9916%Amazon Deals
10
Posted 8th Mar

This deal is expired. Here are some options that might interest you:

  • Good price for:
  • ETHERNET PORT CONFIGURATION: 5 Gigabit ports
  • POWER-OVER-ETHERNET: 4 PoE ports with 55W total power budget
  • PLUG-AND-PLAY: Simple set up with no software to install or configuration needed
  • VERSATILE MOUNTING OPTIONS: Supports desktop or wall mount placement
  • SILENT OPERATION: The fanless design means zero added noise wherever its located, making it ideal for noise-sensitive environments
  • PEACE OF MIND WARRANTY – Covered by an industry-leading 3-year limited hardware warranty
  • ENERGY EFFICIENT: Designed to optimize power usage lowering its cost to operate. Most models are compliant with IEEE802.3az Energy Efficient Ethernet mode.
  • BUILT TO LAST: Every NETGEAR Network switch is rigorously tested for reliability, quality, and performance
3419371.jpg
Community Updates

Groups

10 Comments
Could you use non Poe Ethernet devices too on this ?
wakkaday08/03/2020 21:14

Could you use non Poe Ethernet devices too on this ?


Yes, but you can get much cheaper switch if you will never need PoE support
Freelancer08/03/2020 21:17

Yes, but you can get much cheaper switch if you will never need PoE support


Freelancer08/03/2020 21:17

Yes, but you can get much cheaper switch if you will never need PoE support


Freelancer08/03/2020 21:17

Yes, but you can get much cheaper switch if you will never need PoE support


True , I have one arlo camera but I don’t mind that connected via usb plug but was thinking of I got another switch I could connect my pc via Ethernet. My main concern is bouncing off a bit home WiFi extender using one of these ports , rather then that going directly into my virgin router ...
Am I right in saying this wouldn’t be able to accept vlan tags as it’s not a managed switch
That would be ideal, also if you have spare connection on Virgin hub use it to connect to BT router with cable without getting switch, you can use old routers as a switches, just make sure they have DHCP off and are gigabit rated
JamesBrown-2b3d5.9136608/03/2020 21:32

Am I right in saying this wouldn’t be able to accept vlan tags as it’s not …Am I right in saying this wouldn’t be able to accept vlan tags as it’s not a managed switch


You are correct.
Quote: from
In order to implement VLANs, the routers and switches must support VLANs. Although there are several proprietary protocols in existence, the most commonly used protocol for configuring VLANs is IEEE 802.1Q. Switches that support VLANs are often called "Managed" switches, but it is important to know this can be a misused marketing term and doesn't guarantee VLAN support. All of Ubiquiti’s routers, wireless solutions and most switches support the 802.1Q VLAN protocol, and are interoperable with third-party hardware using the same protocol.
Edited by: "Freelancer" 8th Mar
Damn need a cheap Poe switch with vlan capabilities
"Internet splitter"?
Tenda do a 5 port gigabit Ethernet PoE switch for £29.99. If all you want is a basic PoE switch, get that one. They do a 100mbit version for £24.99 too.
Edited by: "rprp" 9th Mar
the lifetime warranty is worth it so well worth paying nearly double for it.
Post a comment
Avatar
@
    Text