Unfortunately, this deal is no longer available
NZXT H700, Mid Tower PC Case, Tempered Glass Window, E-ATX/ATX/mATX/mITX, 3x120mm Fans, 140mm Fan - Black £99.98 at Amazon
194° Expired

NZXT H700, Mid Tower PC Case, Tempered Glass Window, E-ATX/ATX/mATX/mITX, 3x120mm Fans, 140mm Fan - Black £99.98 at Amazon

£99.98£11110%Amazon Deals
Expert (Beta)16
Expert (Beta)
Posted 22nd Feb

This deal is expired. Here are some options that might interest you:

Great case at a reasonable price.

3411228.jpg3411228.jpgDimensions:
W: 230mm H: 494mm D: 494mm (without feet)
W: 230mm H: 516mm D: 494mm (with feet)
Material(s): SGCC Steel and Tempered Glass
Weight: 12.27 kg
Motherboard Support: Mini-ITX, MicroATX, ATX and EATX(Up to 272mm or 10.7-inches)
I/O Ports:
2 x USB 2.0
2 x USB 3.1 Gen 1
1 x Audio/Mic
Filters: Front and PSU Intake
Expansion Slots: 7
Drive Bays:
2.5”: 7
3.5”: 2+1
Radiator Support:
Front: Up to 360mm with Push/Pull
Top: Up to 360mm
Rear: 120mm
Fan Support:
Front: 3 x 120/2 x 140mm (3 Aer F120 Case Version included)
Top: 3 x 120/2 x 140mm
Rear: 1 x 120/1 x 140mm (1 Aer F140 Case Version included)

Fan Specs
Aer F120 (Case Version)
Speed: 1200 + 200 RPM
Airflow: 50.42
CFM Noise: 28 dBA
Bearing: Rifle Bearing
Aer F140 (Case Version)
Speed: 1,000 + 200 RPM
Airflow: 68.95 CFM
Noise: 29 dBA
Bearing: Rifle Bearing

Clearance
Cable Management: 18-22mm
GPU Clearance: Up to 413mm
CPU Cooler: Up to 185mm
Front Radiator: 60mm
Top Radiator: 30mm
Reservoir & Pump: Up to 224mm (Along cable bar)
Community Updates

Groups

16 Comments
Anyone know how the air flow is in this case?
Edited by: "Yuny_A" 22nd Feb
Yuny_A22/02/2020 16:50

Anyone know how the air flow is in this case?



The tiny little vents on the side at the front for airflow can't be great.
What would be a best buy case for a Gtx1080?
I like the H700 but for the extra money, id personally opt for the "i" version. With the RGB fans and controller, allows a bit for flexibility on colour schemes etc. Cooling is surprisingly decent. My H500 runs quiet and cool (AIO cooled) with top and rear exhausts and this is bigger with more space inside for air to circulate. Id check on some comparisons online @rev6 and consider budget / design preferences.
old stock, no usb-c
What makes this such a good case

I paid £45 for This and it seems as good or better than the one posted


39964061-S0CRS.jpg

then again what do I know
having side vents on a case isnt the issue, its the issue of having the front fans to close to the front for them to grab enough air though the side vents,... so have a look at the where the fans are, then were the vents are in all honesty. this H700 is perfectly fine, however for £100 case not something id personal buy.
Madchester22/02/2020 22:09

What makes this such a good case I paid £45 for This and it …What makes this such a good case I paid £45 for This and it seems as good or better than the one posted [Image] then again what do I know


Its the Claw!.... exceptional £45 case. wide side vent on the rear, 2 fans on the front can be added, nice case, drill a tiny hole under the bottom of it and add a little strobe RGB running though the middle under neath it, seeing as its legs are nice raised and ul get some under neath RGB going off, looks sweet done it on another case once.
I have the h510 (smaller version) .
Airflow is fine for air cooled cpu (be quiet black rock 4) Hence no rad or front fans, and rtx 2060.
just a noctua 120 on rear exhaust and noctua 140 on the top exhaust.
the thing is basically silent even at load
Madchester22/02/2020 22:09

What makes this such a good case I paid £45 for This and it …What makes this such a good case I paid £45 for This and it seems as good or better than the one posted [Image] then again what do I know


Nice find!
TellyLover22/02/2020 16:54

What would be a best buy case for a Gtx1080?


I have mine in a Fractal Design R5 Black Edition. Never any problems with thermals.
fryitup22/02/2020 23:28

I have the h510 (smaller version) .Airflow is fine for air cooled cpu (be …I have the h510 (smaller version) .Airflow is fine for air cooled cpu (be quiet black rock 4) Hence no rad or front fans, and rtx 2060.just a noctua 120 on rear exhaust and noctua 140 on the top exhaust.the thing is basically silent even at load


What motherboard u got ? I just built mine with a H510i and gigabyte master with a 140mm noctua fan on the top. And noticed the fan interferes with the top 2x8pin cpu connectors when plugged in. They fit but I think this is a NZXT design flaw in the case as it needs 5mm higher to fix the problem.
meridiusuk23/02/2020 14:05

What motherboard u got ? I just built mine with a H510i and gigabyte …What motherboard u got ? I just built mine with a H510i and gigabyte master with a 140mm noctua fan on the top. And noticed the fan interferes with the top 2x8pin cpu connectors when plugged in. They fit but I think this is a NZXT design flaw in the case as it needs 5mm higher to fix the problem.


Im using a Aorus Z390 AORUS ELITE.
I too had the same problem, and I agree its a design flaw in the H510 the top should be 5mm higher from the top of the mobo.
I the end I solved it by removing the rubber corner thing on the noctua fan, and then the fan wedged in tight against the 12v CPU connector cable. I think i was lucky with my psu cable being flexible enough for it to work.
fryitup23/02/2020 14:29

Im using a Aorus Z390 AORUS ELITE.I too had the same problem, and I agree …Im using a Aorus Z390 AORUS ELITE.I too had the same problem, and I agree its a design flaw in the H510 the top should be 5mm higher from the top of the mobo.I the end I solved it by removing the rubber corner thing on the noctua fan, and then the fan wedged in tight against the 12v CPU connector cable. I think i was lucky with my psu cable being flexible enough for it to work.


Yep I removed the rubber corner but still . The plugs do go in but u can see the plug been pushed down a little. As this is the new H510i version over h500 I would of thought NZXT would of spotted it.
meridiusuk24/02/2020 07:49

Yep I removed the rubber corner but still . The plugs do go in but u can …Yep I removed the rubber corner but still . The plugs do go in but u can see the plug been pushed down a little. As this is the new H510i version over h500 I would of thought NZXT would of spotted it.


Agree - although its the only sloppy thing I found with this case.
Even the NZXT Cam software for fan control, which is so badly reviewed pretty much everywhere, is working OK for me...
fryitup24/02/2020 08:20

Agree - although its the only sloppy thing I found with this case.Even the …Agree - although its the only sloppy thing I found with this case.Even the NZXT Cam software for fan control, which is so badly reviewed pretty much everywhere, is working OK for me...


Have not got windows on yet to try it just built it sat and Sunday and powered it up.

Also got the light strips for under the case to see what that looks like. Which need installing
Post a comment
Avatar
@
    Text