Unfortunately, this deal is no longer valid
Provelo Bike Tool Kit with 26 Pieces now £36.44 delivered at Amazon
86° Expired

Provelo Bike Tool Kit with 26 Pieces now £36.44 delivered at Amazon

Posted 8th Jul

This deal is expired. Here are some options that might interest you:

good reviews. Normally around the £55 mark
Community Updates
Provelo ToolboxIncluding 26 PartsSmaller standard assemblies and bike repairs require not only some skill, but also the right tool, this tool set gives you everything you need. The set comes in a sturdy plastic case for practical storage and includes a total of 24 tools, as well as a small repair kit with 2 valve tubes, glue, sandpaper and 6 patches.

All in all, the toolbox – which is fully equipped – ensures that you can start on maintenance work or repairs immediately and will always have exactly the right tool at hand.

  • Complete equipment for all common bicycle assembly and repairs
  • 1 sturdy plastic case
  • 6 Allen keys 2/2.5/3/4/5/6 mm
  • 3 tyre levers
  • 1 screwdriver PH2
  • 1 angle socket wrench, 8 mm, with adapter
  • 2 cone spanners, 13x14/15x16
  • 1 crank-arm puller for square brackets
  • 1 pedal wrench 15 mm
  • 1 Torx key 25
  • 1 chain whip
  • 1 spoke wrench ring 9G – 15G
  • 1 freewheel removal tool
  • 1 chainring nut wrench (counter holder for chainring screw nuts)
  • 1 bottom bracket wrench for Shimano Octalink
  • 1 bottom bracket wrench for Hollowtech 2
  • 1 bottom bracket adjustment tool for Shimano Hollowtech 2
  • 1 chain riveting tool
  • 1 repair box (6 patches, glue, sandpaper, 2 valve tubes)
  • Whether you need it for day-to-day riding in the city or for longer trips during your free time – Provelo’s product range will get you to where you’re going in comfort


Top comments
gooeynote08/07/2019 17:31

If I was looking a getting a bike tool kit I'd spend an extra 4 quid for …If I was looking a getting a bike tool kit I'd spend an extra 4 quid for 11 more pieces and get this chainreactioncycles.com/mobile/x-tools-bike-tool-kit-37-piece/rp-prod55963?gs=1&sku=sku202704&pgrid=60711843058&ptaid=pla-425901855080&utm_source=google&utm_term=&utm_campaign=PLA+All+Products&utm_medium=base&utm_content=mkwid|sgmUPU2fA_dm|pcrid|309840114632|pkw||pmt||prd|202704UK&gclid=CjwKCAjw04vpBRB3EiwA0IieaqLqQd2fVtqPua-IP4Ass8TO4G6TaCHgWQfCBhnJBWqrMCHjDiLHLhoCK_cQAvD_BwE

  • Puncture Repair Kit: Rubber cement, sandpaper, 2 bits of rubber, 6 small, 2 medium, and 1 large patch
  • Chain Rivet Extractor: Compatible with MTB/road chains and some single speeds
  • Large Double-ended Headset Spanner: 30/32/36/40
  • Double-ended Spanner: 8/10mm
  • 2 Double-ended Cone Spanners (Sizes): 13/14/15/16 x 2
  • Spoke Key Ring: 3.3/3.5/3.2/13G/14G/15G
  • Bit and Socket Set Compatible with L Shaped Tool: Flat bladed screwdriver 5/7, Torx: T25/T30, Philips PH2/PH1, Socket 8/9/10 plus adaptor
  • Ball-ended Allen Key Set: 2/2.5/3/4/5/6/8/10
  • Crank extractor tool
  • Chain whip
  • Shimano compatible External bb tool (HollowTech II)
  • Shimano compatible crank cap removal tool (HollowTech II)
  • 15mm pedal wrench with 24mm hex in centre
  • ISIS bottom bracket tool
  • Cassette lockring remover tool
  • 3 tyre levers
Question.. I have all the univeral tools (drivers spanners sockets keys) I'll ever need to work on cycles, but for specialist cycle only tools what is the best buy?
What are the allen keys like in the chain reaction kit. I just putting together some tools to buy on chain reaction today and was looking to buy some hex allen tools, maybe a torque wrench.
Best to spend more on some decent standalone allen tools, rather than from a cheap kit. It will pay you back in the long term.
I'd agree with others about buying fewer, decent quality tools that you'll actually use. Obviously, everyone will have tools that they use on their own bikes every day (and it also depends on the generation of bikes you own - I don't think I've owned a bike with a square-taper bottom bracket for years, nor do any of my bikes have nuts that require a socket set!), but I would recommend the following if you want to properly maintain your own bikes. You don't need them all, but start from the top down and you won't go far wrong!

1. A decent set of allen keys. I absolutely love Wera and these are excellent value.
2. Decent tyre levers. I like these ones, but tyre levers are something of a religion to cycle mechanics, so expect others to have their own opinions!
3. TipTop puncture repair kit. Nothing is as good and you can buy the patches separately to keep the kit topped up. I've got a drawer full of the things!
4. Decent pump. Joe Blow trackpumps are well regarded and a decent price.
5. Workstand. Plenty out there without spending £00s.
6. Side cutters and small pliers. I've had a set of cheap ones (from a pound shop, no less!) for years that look very much like these, and they are always at the top of the tool box. I should get some better ones at some point!
7. Good quality cable cutters. No you don't need to buy the Park ones, but get some with hooked blades like these ones have and they'll make your life much easier when replacing both inner and outer cables as they cut much cleaner than flat blades.
8. Assorted flat-blade and cross-head screwdrivers.
9. Chain break tool. Any sort will do providing it will shove pins out as these days many people no longer use them to fit chains, preferring to use...
10. Chain quick-release pliers. One of those daft tools that I use all of the time when fitting and removing chains using chain quick links.
11. Cassette tool + chain whip. Personally, I like the ones with a pin up the middle to locate them, and Park's cassette pliers, but I use these several times a week so can justify the cost. A normal chain whip is much cheaper and fine for most people. If you never remove a cassette, you may never need this.
12. Cone spanners (thin spanners designed for adjusting hubs). I like the Wiggle ones and have two of each size as generally you use them in pairs. The ones in the kit in this deal will be almost unusably bad... I'd highly recommend these if you have cup and cone bearings as these need far more frequent maintenance and adjustment than most people give them!
13. A decent socket set is always a useful investment anyway, and I like Bahco and Teng, which are excellent quality at a reasonable price. For most work, always buy six-point sockets, not 12-point as they are much less likely to round off a stubborn bolt-head.
14. Seal pick set. Almost insanely useful and cheap tools for loads of different tasks and only a fiver from eBay! The straight pick I use every time I recable a bike to splay open the cut end of the outer cable before fitting the inner to ensure the lowest friction fitment.

(Oddly, I don't actually own a pedal spanner as most of mine don't use them rather needing a large allen-key on the inside end of the axle. YMMV here, and if you have pedals that require one, get a decent quality nice and long one!)

This list is more or less in order based on how often I use stuff, or how cheap it is. Stuff like spoke keys, torx drivers, bottom bracket tools, crank extractors etc. are likely to only be needed infrequently depending on your bikes, or the type of maintenance you do, so buy them as you need them and spread the cost. Where possible, buy decent stuff and it will last a lifetime. I've got 100s of task-specific tools for doing certain tasks (frame bearings, headsets, wheel maintenance etc.) but most people either won't need these or, as I've done, will just pick them up as and when they need them for a job.

Happy to accept suggestions for anything that you have in your own toolbox that you think I've missed!
Post a comment