RH Alurad Alloy wheels huge discount on Amazon
644°

RH Alurad Alloy wheels huge discount on Amazon

56
Found 17th JunEdited by:"hoodr40"
Amazon have massive discounts on there RH alloys (good quality German alloys) they start from around £20 per alloy. There is still a fair few designs with 4 in stock.

If your looking for alloys which are very good quality these are certainly worth a look
Community Updates

Groups

Top comments
Think I will throw a set on my Dacia sandero.
Pump my ride, I mean bride.

Ordered now I need some lowering springs, a loud exhaust, a go faster stripe and some neon lights. Any deals
deleted17967117th Jun

My Sandero could do with a set.


Get 4 at £20 each and instantly double its value!
56 Comments
Deleted
Edited by: "MadeDixonsCry" 17th Jun
Think I will throw a set on my Dacia sandero.
SOUTHWALES2 m ago

Think I will throw a set on my Dacia sandero.


Will they fit? Genuine question.
Avatar
deleted179671
SOUTHWALES4 m ago

Think I will throw a set on my Dacia sandero.


My Sandero could do with a set.
Pump my ride, I mean bride.

Ordered now I need some lowering springs, a loud exhaust, a go faster stripe and some neon lights. Any deals
deleted17967117th Jun

My Sandero could do with a set.


Get 4 at £20 each and instantly double its value!
Can only see 5 stud and the dero is 4 I believe
J80JPR3 m ago

Can only see 5 stud and the dero is 4 I believe


Stud and Dacia sandero! Two words that may not go together!
Edited by: "compadre" 17th Jun
Stupid question, tyre size is basic 185/65R15 88H, how do I obtain the alloy size?
Dacia...(lol)
bullsblood4 m ago

Dacia...(lol)


No car....(even loller!)
Gario9917th Jun

Stupid question, tyre size is basic 185/65R15 88H, how do I obtain the …Stupid question, tyre size is basic 185/65R15 88H, how do I obtain the alloy size?



The alloy size is the one after the R so for that tyre it's 15"
Gario9917th Jun

Stupid question, tyre size is basic 185/65R15 88H, how do I obtain the …Stupid question, tyre size is basic 185/65R15 88H, how do I obtain the alloy size?


The alloys (for your car) are 15"...

However you need the correct stud pattern and correct offset for your car. If you're lucky it may be stamped on your wheels (inside probably) otherwise ask the manufacturer or ask a proper accessory/alloy dealer....

Offset is where the centre of the wheel is (sideways as if you are in the car)....
Gario9917th Jun

Stupid question, tyre size is basic 185/65R15 88H, how do I obtain the …Stupid question, tyre size is basic 185/65R15 88H, how do I obtain the alloy size?


Should have said...
185 = wide
65 = aspect ( % of width for height)
15 =wheel diameter
88 = load
h = speed
Thank you OP, got these ones for £123.12
Cheap for a reason, very poor quality product
Not voting either way
Shame they don't have 4 x 100 15"
Have ordered lots of alloys before most come dinged so be aware.
malm2 m ago

Have ordered lots of alloys before most come dinged so be aware.


I ordered 2 sets will update on condition when they come, they can always go back need be lol
Edited by: "Krizzo3" 17th Jun
ansarch20 m ago

Cheap for a reason, very poor quality product Not voting either way


Clearly showing your lack of knowledge in alloys RH are a high end German alloy manufacturer these are usually way way higher in price then they are here


For example the ones in the pic were reduced to around £66 for 18x11's take a look online for the usual price it's atleast 10 times the price per alloy and if you're wondering what car they would usually go on they are for 911 turbo, GT3 GT4 etc so yeah not cars which cheap alloys get fitted to
Edited by: "hoodr40" 17th Jun
Seems a good price but will pass on this one as can not be bothered returning the damaged ones.
Alloys are not sent well enough packaged, but wish all who go for it the best of luck.
Thanks op for taking the time and effort to post it is appreciated.
hoodr4029 m ago

Clearly showing your lack of knowledge in alloys RH are a high … Clearly showing your lack of knowledge in alloys RH are a high end German alloy manufacturer these are usually way way higher in price then they are hereFor example the ones in the pic were reduced to around £66 for 18x11's take a look online for the usual price it's atleast 10 times the price per alloy and if you're wondering what car they would usually go on they are for 911 turbo, GT3 GT4 etc so yeah not cars which cheap alloys get fitted to


Are you serious these are not high end at all. They sell for £60 an alloy. If it loons too good to be true it probably is
Show where you can find RH Alurad P Rad for £60....
Anything for Corsa ? 195/55/16
Bought for my vw golf heat
Bisal_Dhakal3 m ago

Anything for Corsa ? 195/55/16


I could be wrong but I think a Corsa PCD is 4x100 or something like that
RH alloys are primarily aimed at German car manufacturers (5x120, 5x114 etc) so I think pretty much none of the wheels would fit
George_Stewart22 m ago

Are you serious these are not high end at all. They sell for £60 an alloy. …Are you serious these are not high end at all. They sell for £60 an alloy. If it loons too good to be true it probably is


I'm still waiting for the links at where these can be had for £60 a alloy I've looked all over the net and the cheapest I can find the RH Alura P Rad for a set is over £2k

lkperformance.co.uk/whe…048
tyreleader.co.uk/all…BwE

But apparently they are low end £60 alloys
Set your expectations and your should be ok, personally I'd not risk anything this cheap on my car. One thing to consider is you need to check the offset as well as with size and pcd to make sure they will fit. If you know the standard wheel size you can use willtheyfit.com to compare how these wheels will fit your car. It won't show you brake clearance but I doubt they'll be an issue with wheels like this
dont waste your time ... mispriced
jona772 h, 35 m ago

Get 4 at £20 each and instantly double its value!


these are more like £120 each not all set
plagued7 m ago

Set your expectations and your should be ok, personally I'd not risk …Set your expectations and your should be ok, personally I'd not risk anything this cheap on my car. One thing to consider is you need to check the offset as well as with size and pcd to make sure they will fit. If you know the standard wheel size you can use www.willtheyfit.com to compare how these wheels will fit your car. It won't show you brake clearance but I doubt they'll be an issue with wheels like this


So if Amazon reduced the new Ipad to £40 would you be cautious on using it because of the price?
I'm aware these alloys are cheap but this isn't the usual price they sell for buy a set cancel the order then take a look back at them and you will see the normal price is a lot higher.
RH are a very good brand anyone and well known in the German car scene.
Go on lk performance website they sell these on their site. You'll be able to put your make and model in to see if these fit your car. Mine sadly don't fit
Edited by: "peterkay11" 17th Jun
Avatar
deleted179671
jona774 h, 56 m ago

Get 4 at £20 each and instantly double its value!


I'm happy with my Dacia Sandero NO vehicle duty & upto 60 mpg and NO mechnical problems after 3 years.
Edited by: "deleted179671" 17th Jun
Don't forget about the centre hole bore size....if it's too small it won't fit even if offset and pcd are correct....if too large spigot rings may fix the problem.
Gario9917th Jun

Stupid question, tyre size is basic 185/65R15 88H, how do I obtain the …Stupid question, tyre size is basic 185/65R15 88H, how do I obtain the alloy size?


15 is the size but you can go bigger but specs of your particular car such as pcd/bolt pattern and center bore remain constant.
wheel-size.com
Edited by: "kabs" 17th Jun
SOUTHWALES6 h, 29 m ago

Think I will throw a set on my Dacia sandero.


Don't you mean AT!
Don't forget to inform your insurers about changing wheels.
Thank you, now just got to hope to god they fit.

I've got a Mini Countryman with R126 alloys. I live at the coast, and it seems to have killed the current wheels. Unfortunately they are a split rim design, with a diamond cut outer, and so I think they'll cost a small fortune to get refurbished properly.

Current alloys are 225/45/18. 5 bolt, 7.5J apparently 5x120PCD and ET52. Also apparently, bore 72.6

I found a set of 4 on Amazon, 8J, 5x120, ET45. Bore 74.1. £190 delivered.

First result on eBay showed a set of four spigot rings for under a fiver.

I have four brand new Avon tyres sat in the house waiting to go on, I had been waiting to get the wheels refurbished before fitting.

Am I doing something very stupid here or is my calculation accurate?

Many thanks for any help.
hoodr4010 h, 1 m ago

Clearly showing your lack of knowledge in alloys RH are a high … Clearly showing your lack of knowledge in alloys RH are a high end German alloy manufacturer these are usually way way higher in price then they are hereFor example the ones in the pic were reduced to around £66 for 18x11's take a look online for the usual price it's atleast 10 times the price per alloy and if you're wondering what car they would usually go on they are for 911 turbo, GT3 GT4 etc so yeah not cars which cheap alloys get fitted to


Not sure what is your interest or financial gain in promoting a poor quality product but I do know about these alloys, Thank you very much
Post a comment
Avatar
@
    Text