Unfortunately, this deal is no longer available
X-rocker XR racing stand £49.99 @ Argos
344° Expired

X-rocker XR racing stand £49.99 @ Argos

28
Posted 11th Jan

This deal is expired. Here are some options that might interest you:

My first deal! Was looking for a racing wheel stand. Seems like a good deal at under £50. Decent reviews on previous posts here too.
Good availability too.
Community Updates

Groups

28 Comments
My son got the Thrust Master steering wheel and pedals for Christmas. I was looking for one of these, great price
This looks good as my laptop stand too
Wish I had room for this. Would be great for vr
Great deal, cheers OP. Been looking a stand for a long while however not badly enough to spend ~£100 on one. This should do the job nicely. Saturday afternoon in Argos, what could be better??
Thanks op. Bought. For 50 is a no brainer. Getting started with iracing
Thrustmaster t300 deal needed!
With GT sport. =winning.
Nice! Bought through eBay for bonus nectar points too ;-)
Am I correct in thinking that this doesn’t have a place to put the driving force Logitech shifter?
This or wheel stand pro. That's what I am currently using
sam.parsons11/01/2020 16:15

Am I correct in thinking that this doesn’t have a place to put the driving …Am I correct in thinking that this doesn’t have a place to put the driving force Logitech shifter?


Have read some reviews which say it does come with a gear shift shelf also
bigjt11/01/2020 18:04

Have read some reviews which say it does come with a gear shift shelf also


So it does come with the gear shift shelf too?
sam.parsons11/01/2020 18:56

So it does come with the gear shift shelf too?


Yes it does. Just unboxed mine. Sadly the fixing holes didn't line up so couldn't put it together - it's being exchanged tomorrow.
deluka11/01/2020 19:19

Yes it does. Just unboxed mine. Sadly the fixing holes didn't line up so …Yes it does. Just unboxed mine. Sadly the fixing holes didn't line up so couldn't put it together - it's being exchanged tomorrow.


Looks like I’ve just bitten but along with the deal on at the moment with the Logitech force feedback g920 wheel, pedals and shifter, and the stand for 199.99

39652266-Sb1XA.jpg
Edited by: "sam.parsons" 11th Jan
Does it fit a t150 wheel? I don't see it in the description
CommanderKeen12/01/2020 01:01

Does it fit a t150 wheel? I don't see it in the description


It should fit 99% of wheels. I don't see t300rs mentioned either (unless I missed it?) and mine fits perfectly.

Just as a side note, the reviews state the instructions are poor and I can confirm they are. The arms go on the inside of the bracket (as in the product picture) but the first two sections of the instructions show them being fitted to the outside.

Also, I'm not sure if there's a warp in my frame or what but it wobbles. I've had it on 2 or 3 surfaces (including a tiled floor) and it wobbles. I'll retrofit something to prevent that. I would consider returning only I couldn't be bothered dismantling and building a new one.
Edited by: "GMac11" 12th Jan
GMac1112/01/2020 09:53

It should fit 99% of wheels. I don't see t300rs mentioned either (unless I …It should fit 99% of wheels. I don't see t300rs mentioned either (unless I missed it?) and mine fits perfectly.Just as a side note, the reviews state the instructions are poor and I can confirm they are. The arms go on the inside of the bracket (as in the product picture) but the first two sections of the instructions show them being fitted to the outside.Also, I'm not sure if there's a warp in my frame or what but it wobbles. I've had it on 2 or 3 surfaces (including a tiled floor) and it wobbles. I'll retrofit something to prevent that. I would consider returning only I couldn't be bothered dismantling and building a new one.


Wow really, it wobbles? For 50 quid, you expect it to be pretty much stable to be honest.. Hmmmm thinking of giving this a miss
CommanderKeen12/01/2020 10:34

Wow really, it wobbles? For 50 quid, you expect it to be pretty much …Wow really, it wobbles? For 50 quid, you expect it to be pretty much stable to be honest.. Hmmmm thinking of giving this a miss


That’s why the call it the X-Rocker
deluka11/01/2020 19:19

Yes it does. Just unboxed mine. Sadly the fixing holes didn't line up so …Yes it does. Just unboxed mine. Sadly the fixing holes didn't line up so couldn't put it together - it's being exchanged tomorrow.


I've just tried the replacement from Argos and exactly the same issue. Looks like nuts are welded on in slightly wrong alignment. Will be contacting manufacturer to see if they have a replacement part. Anyone else have this issue?
Just purchased and built one of these.
It's just what I needed and I'm well impressed with it.
Building it was quick and easy and it was solid and did not move when I tested it with a thrustmaster wheel on Xbox.
Avatar
deleted1559845
GMac1112/01/2020 09:53

It should fit 99% of wheels. I don't see t300rs mentioned either (unless I …It should fit 99% of wheels. I don't see t300rs mentioned either (unless I missed it?) and mine fits perfectly.Just as a side note, the reviews state the instructions are poor and I can confirm they are. The arms go on the inside of the bracket (as in the product picture) but the first two sections of the instructions show them being fitted to the outside.Also, I'm not sure if there's a warp in my frame or what but it wobbles. I've had it on 2 or 3 surfaces (including a tiled floor) and it wobbles. I'll retrofit something to prevent that. I would consider returning only I couldn't be bothered dismantling and building a new one.


It says in the description; 'Pre drilled to accept the Logitech G25, G27, G29 and G290. Thrustmaster T300RS, TX F458 and T500RS, and all clamp fixing steering wheels'. I'm assuming that means with the pre-drilled holes you can hard mount a Logitech G series wheel, but with everything else you clamp them on.

I'm running a Thrustmaster TX but with G27 pedals, and since fitting a GTEYE brake mode I've had issues with my pedals moving around, so if I can hard mount the pedals to this stand it might be just the ticket
Edited by: "deleted1559845" 13th Jan
deleted155984512/01/2020 14:19

It says in the description; 'Pre drilled to accept the Logitech G25, G27, …It says in the description; 'Pre drilled to accept the Logitech G25, G27, G29 and G290. Thrustmaster T300RS, TX F458 and T500RS, and all clamp fixing steering wheels'. I'm assuming that means with the pre-drilled holes you can hard mount a Logitech G series wheel, but with everything else you clamp them on.I'm running a Thrustmaster TX but with G27 pedals, and since fitting a Nixim brake mode I've had issues with my pedals moving around, so if I can hard mount the pedals to this stand it might be just the ticket


I'm quite tempted but still trying to work out whether it's possible to hard mount a Fanatec CSR and pedal set. I think this is the same product and the manufacturer implies it has pre-drilled holes for Logitech / Thrustmaster / Fanatec. It's going to be a nuisance to return if incompatible or any tolerance issues.
I'm thinking off getting this stand. but not sure if it would fold away easy when not in use as can't find any pictures anywhere.
Avatar
deleted1559845
Confuzz12/01/2020 16:39

I'm thinking off getting this stand. but not sure if it would fold away …I'm thinking off getting this stand. but not sure if it would fold away easy when not in use as can't find any pictures anywhere.


Maybe look at the wheel stand pro if you need to store it away?

39658951-nFoIX.jpg
Obviously check reviews, iirc they aren't meant to be that sturdy, and a pillar between my legs (same with a Playseat) I'd personally find annoying.
deluka12/01/2020 13:03

I've just tried the replacement from Argos and exactly the same issue. …I've just tried the replacement from Argos and exactly the same issue. Looks like nuts are welded on in slightly wrong alignment. Will be contacting manufacturer to see if they have a replacement part. Anyone else have this issue?


mine assembled just fine - just one thing nearly threw me and that was the wheel mount (table) section, where you have to put the entire piece INSIDE both extendable arms then screw in the wingnuts. Initially i'd pushed the wheel mount section over the uprights and it kind of fitted.
See pic below for the correct way 39669755-o9gQi.jpg
oh and btw if you are interested in a seat..... check this hotukdeals.com/dea…890 £119 for the official 'chicane' seat
Anybody else who bought this find it’s a little bit wobbly?
@benbb no mine is solid
sioakley16/01/2020 17:34

@benbb no mine is solid


Thanks, I have emailed them a video and I’m awaiting a response from them.
Post a comment

Deal posting newbie! This is deluka first deal post. Help out by leaving a posting tip or just to show your appreciation for their contribution.

Avatar
@
    Text