Boiler cabling

9
Found 24th Jan
Hope someone could help me out here
Last Year i had a new combi boiler installed and is working perfectly
the boiler is powered from a socket upstairs. But there are two junction box in the middle (one is to split the power between the boiler and thermostat)
this second box is looks like a connector
I need to remove this second junction box to make space for cabinet
Do i need to have this second junction box and what type of cable is use (5 core flex)?
thanks in advance
Community Updates
  1. Ask
Groups
  1. Ask
9 Comments
Can you post a picture? Sounds like you need an electrician!
Download your boiler installation manual online, it should state what you need to feed it with.
I had new combi fitted a few months back and mine goes from wall power socket straight to the thermostat and then from there to the boiler.
Original Poster
33134219-gle3W.jpg
Original Poster
this is my second junction box
which i would like to removed and have one cable
Original Poster
33134246-MIyh8.jpg
Original Poster
this is first junction box where the power is split into the thermostat, boiler and nest controller (three wires)
pepsicola0072 h, 57 m ago

this is first junction box where the power is split into the thermostat, …this is first junction box where the power is split into the thermostat, boiler and nest controller (three wires)


Best to get an electrician to relocate and check cabling at same time.
Original Poster
ok will call an electrician
Post a comment
Avatar
@
    Text

    Top Discussions

    Top Merchants