Error code 51330 on my Wii

Trying to connect to internet...
can anyone help as its showing error code 51330.
rep will be left.

20 Comments

This error code usually indicates a problem relating to wireless security. Please try the following troubleshooting:

1. Are you using WEP or WPA security on your router?
1. Log into the router using the default IP (consult your router's manual for assistance)
2. Locate the "wireless security" section of your router settings and find the WEP or WPA key.
3. If you are using 64-bit encryption, the WEP Key must be a 10-character key consisting of numbers or letters A through F.
4. If you are using 128-bit encryption, the WEP Key must be a 26-character key consisting of numbers or letters A through F.
5. The WEP Key must be a Hexadecimal (0-9, A-F, no other special characters or letters).
6. If your router has multiple slots for a WEP Key, make sure the active key is the one in the #1 slot.
7. If you are using WPA, the Wii console is compatible with the following types:
* WPA - PSK (TKIP)
* WPA - PSK (AES)
* WPA2 - PSK (AES)

2. If your WEP or WPA key is correct, then the problem might be related to MAC address filtering:
1. From the router settings, locate the "MAC address filter" settings (also known as "access control", "access list", or "network filter" depending on your router model).
2. If the Mac address filter is set to "enabled", then you must add the Wii's MAC address to the "allowed" list. You can locate the Wii's MAC address from the "console information" page (located under "Internet" in the Wii Settings).
3. If the Mac address filter was disabled, then continue troubleshooting.

3. Try adjusting the "Channel" your wireless router broadcasts on. We highly recommend setting your wireless router to either channel 1 or 11. This can potentially increase the download speed. For information on accessing your router's settings, click here to select the brand name and model number of your router (if available).

4. Check Nintendo's router info for special notes, if available, for your router.
1. Click here to go to our Wireless Router lookup page.
2. Use the drop-down box to select, if available, your router manufacturer.
3. Click on your router's model number, if available.
4. Read any "special notes" at the top of the router's page. Many issues can be solved by changing settings described in the "special notes."

5. Ensure that the router is set to broadcast in "mixed" or "b/g" mode. Routers set to "g only" may not be able to allow a successful connection from the Wii console. (The option to change this setting is typically found in the "Wireless" section of your router's settings. For information on accessing your router's settings, click here to select the brand name and model number of your router, if available.)

6. Try a "Manual Setup" with the Wii console (how to), using your network's IP configuration settings. To access these settings:
1. On your PC, click "Start" and then "Run."
2. Type "CMD" into the field that appears to open a new window.
3. Type "IPCONFIG/ALL" and press "Enter" to display a list of internet settings. Locate the settings asked for by the Wii console during the Manual Setup process and enter them.

7. Power cycle your router and modem by unplugging them both from the wall. Wait a few minutes, and plug the modem back in. Wait a couple of minutes for the modem to initialize, then turn on the router. Try to connect the Wii console online and test for proper response.

You need to change your router to channel 1 or 11 to fix it

Original Poster

Now its saying Wii network settings must be reviewed first???

Original Poster

51331
the error code now

Original Poster

unable to connect to server now

sharonwai;2713849

51331the error code now



That's a wireless security error.......double check your key is right.

Have you made sure the router is in mixed mode and channel 1 or 11 else you won't get far.

Crikey choc did u paste that or are u a genius ? :thinking: :-D

Original Poster

i got a sky router how can i change settings?

sharonwai;2713868

i got a sky router how can i change settings?



Type 192.168.0.1 into your browser to go to the settings page.

If you don't know your username and password then try:

Username - Admin
Password - Sky

Original Poster

Syzable;2713884

Type 192.168.0.1 into your browser to go to the settings page.



its askin for my username and password

sharonwai;2713899

its askin for my username and password



Try the standard ones i put above........if that doesn't work you'll need to ring Sky

Original Poster

Syzable;2713911

Try the standard ones i put above........if that doesn't work you'll need … Try the standard ones i put above........if that doesn't work you'll need to ring Sky



dont work for me
goin bald tonight

sharonwai;2713916

dont work for megoin bald tonight



You'll need to ring Sky to get them to confirm your username and password for you.....they will also talk you through how to change the settings.

They should be still open :thumbsup:

it shoudl be admin and sky
not sure if router is case sensitive but think it should all be lower

Original Poster

crow99;2713968

it shoudl be admin and skynot sure if router is case sensitive but think … it shoudl be admin and skynot sure if router is case sensitive but think it should all be lower



low cap seems to be working

Original Poster

thanks everyone for helping. Now i get to go online thanks to u guys. i have left rep for ppl who had contribute. x x x x

sharonwai;2714299

thanks everyone for helping. Now i get to go online thanks to u guys. i … thanks everyone for helping. Now i get to go online thanks to u guys. i have left rep for ppl who had contribute. x x x x



Glad you got it sorted.
Post a comment
Avatar
@
    Text
    Top Discussions
    1. I banned myself from HUKD for 3m, I saved so much money!2642
    2. Thousands of minimum wage workers to receive part of £2,000,000 compensatio…44
    3. Weekly game codes giveaway 183722
    4. How much would you pay for this chair?1214

    See more discussions