Help with Mounting a TV

Posted 26th Feb 2023

Hi, I bought a Samsung today - t22e390ex

I want to wall mount it but the HDMI and Power connectors are on the back in an indentation so I can't have it flat against the wall.

Is there a cheap solution please?

Thanks

13 Comments

sorted by

Helpful567
26th Feb

As stated above, the problem is the HDMI and the power supply which stop the TV from being able to be put flush against the wall.

You need a 90 degree power cable and a 90 degree HDMI cable

These will not make the TV go 100 % flush against the wall, but will help

90 degree power supply from ebay

90 degree hdmi adaptors
Willy_Wonka
26th Feb
You can buy 90% angled hdmis & power adaptors
PonJaul76
27th Feb
This, get a 90 degree hdmi adaptor
MonkeyMan90
26th Feb
Get a bracket that has an adjustable arm like this
Robloxian Author
26th Feb
I looked at that but the bracket you put on the back of the TV then covers up the HDMI ports
Mark_Hickman
26th Feb
This one i use, doesn't cover ports, from screwfix but think its cheaper currently at currys
(edited)
Robloxian Author
26th Feb
Thanks but my TV is only a 22" lol but yeah, that kind of design I need
Jonwillis
28th Feb
Invision TV Wall Bracket Mount for 22 24 28 32 34 40 43 50 Inch TV & Monitors VESA 100x100 to 400x400 Ultra Slim Tilt Swivel and Extends for 4K LED HDR Flat & Curved Screens - Max Load 27.2kg (EV400) amzn.eu/d/3…CPS

These are a good make and a bit cheaper than sanus.
Should block the ports and as above, use right angle connectors if needed, it feed cables in via a hole in the wall (use brush plates for a neat finish)