Expired

Indesit washer/dryer help please !

Found 9th Oct 2011
Hi all,

hope someone can help me out here

had my washer dryer (indesit iwdc6125) for just over a year now, and its started playing up.

first of all it would make clothes wet instead of dry on a 'dry' cycle,

and now today on a regular wash it stopped working leaving water in the drum and all the top row of lights were constanly flashing.

tried turning of and on, still the same happens, does anyone have any ideas ??

10 Comments

Banned

I assume you have done the obvious and cleaned out air & water filters on a regular monthly or so basis?

hi this is some error codes that may help to point you in right direction

f01 light 4, motor triac
f02 light 3 motor, jammed/ tacho
f03 lights 3&4 Ntc fault
f04 light 2. pressure sw stuck on empty
f05 lights 2&4, pressure sw stuck on full
f06 lights 2&3, N/A?
f07 lights 2&3&4 heater relay
f08 light 1. heater relay
f09 lights 1&4 eprom/setup error
f10 lights 1&3, pressure switch not sensing
f11 lights 1&3&4, pump/draining error
f12 lights 1&2, communication error
f13 lights 1&2&4, dryer ntc/ fan motor
f14 lights 1&2&3, dryer heater
f15 lights 1&2&3&4, dryer heater relay
f16 N/A
f17 light 4, door lock
f18 light 3 comms error (3 phase motor) power board

f1 and f17 share the same light


singer

Why do people make a Thread then leave strait away.

I had this ages a go with an Hotpoint washer/Dryer.

Engineer came out and removed a filter and then it was fine.

Original Poster

(wont try to quote you all) but it is the top line of lights constantly flashing.

i phond up indesit and they said there wasnt a filter as such to clean out as it was a condensing unit, unless i am overlooking something obvious.

@wheresmenuts, does it really matter?, amnybe i have other things to do, or the dog wanted to go for a walk

Hi
Definitely check the filter. My wife never knew and ours did the same. It can get clogged up with fluff.
Read manual if you not sure how to do it. Try first as it might be a simple thing. Or you will be paying a lot of money for a call out that you could solve yourself.

Banned

lidds

(wont try to quote you all) but it is the top line of lights constantly … (wont try to quote you all) but it is the top line of lights constantly flashing.i phond up indesit and they said there wasnt a filter as such to clean out as it was a condensing unit, unless i am overlooking something [email protected], does it really matter?, amnybe i have other things to do, or the dog wanted to go for a walk


it will definitely have a drain access plug which may be blocked

Original Poster

Not sure how to acces the filter the user manual just shows how to clean the pump and the tray that you put powder in, I will. Have another look, thanks

we have a similar problem. the wash cycle goes okay but when it starts the dry cycle, all the lights flash and it stops. we have cleaned the filter out and it still wont dry

I have an undesirable washing machine that wasn't draining properly after any wash cycle, cleaned filter which didn't help, code 05 suggested discharge pump, pump replaced satis. If you have a washer dryer and it is overheating the cooling fan inside has detached itself from the cooling motor shaft held on with small grub screw. File a flat on motor shaft and re attach fan.
Post a comment
Avatar
@
    Text
    Top Discussions
    1. South Park Fractured download Stick question22
    2. AffordableMobiles Claim Voucher for Cashback22
    3. Any ideas for eye glare protection from computer screens?68
    4. Building a PC Need Help!58

    See more discussions