Groups

    Plasma TV setup help

    Ive just purchased a Sony 42inch plasma pfm-500a2we anyone know how I can set this up to work a standard scart freeview box?
    All the connections look like optical connections?
    Rep for any help.

    Its the same as this:
    plasmatvbuyingguide.com/pla…pdf

    4 Comments

    does the tv actually have a scart socket?

    Original Poster

    Emmamed;5716255

    does the tv actually have a scart socket?



    Nope its got lots of odd ones.
    The component cables look like optical connections.
    Then Y/C, LINE, HD/COMP, VD, SYNC?
    They all have optical type connections as well??

    The specs have this info for I/O...

    Input/Output
    RGB 1 RGB: BNC connectors, 0.714 Vp-p/non-composite, 1 Vp-p/composite, 75 ohm auto-termination, loop through
    YUV: 0.7 Vp-p/non-composite (U/V), 1 Vp-p/composite (Y), 75 ohm auto-termination, loop through
    HD/COMP, VD: H (or composite) sync, V sync, 1-5 Vp-p, 75 ohm high impedance, loop through
    Audio L/R: Phono, 500 mV rms, high impedance, loop through

    RGB 2 RGB: D-sub 15 pin connector, 0.714 Vp-p/non-composite, 75 ohm, 1 Vp-p/composite
    External sync: H (or composite) sync, V sync, 1-5 Vp-p, 75 ohm, high impedance
    Audio L/R: Phono, 500 mV rms, high impedance

    based on that. i think you might be able to try these?

    Scart to D-sub: maplin.co.uk/Mod…t15
    Scart to BNC: maplin.co.uk/Mod…t15

    Amb

    Original Poster

    Ambdon;5716395

    The specs have this info for I/O...Input/OutputRGB 1 RGB: BNC … The specs have this info for I/O...Input/OutputRGB 1 RGB: BNC connectors, 0.714 Vp-p/non-composite, 1 Vp-p/composite, 75 ohm auto-termination, loop throughYUV: 0.7 Vp-p/non-composite (U/V), 1 Vp-p/composite (Y), 75 ohm auto-termination, loop throughHD/COMP, VD: H (or composite) sync, V sync, 1-5 Vp-p, 75 ohm high impedance, loop throughAudio L/R: Phono, 500 mV rms, high impedance, loop throughRGB 2 RGB: D-sub 15 pin connector, 0.714 Vp-p/non-composite, 75 ohm, 1 Vp-p/compositeExternal sync: H (or composite) sync, V sync, 1-5 Vp-p, 75 ohm, high impedanceAudio L/R: Phono, 500 mV rms, high impedance based on that. i think you might be able to try these?Scart to D-sub: http://www.maplin.co.uk/Module.aspx?ModuleNo=37141&C=SO&U=strat15Scart to BNC: http://www.maplin.co.uk/Module.aspx?ModuleNo=4702&C=SO&U=strat15Amb





    Thanx mate have left you some rep :thumbsup:
    Post a comment
    Avatar
    @
      Text
      Top Discussions
      1. Are the free antivirus any good?56
      2. Currys Return33
      3. How long do CEX take to process a bank transfer?87
      4. I would not recommend anyone to buy tickets in viagogo33

      See more discussions