Expired

Programming Key Remote - VW Touran 2005

3
Found 11th Mar 2014
I purchased a 2nd key from ebay but now I am struggling to programme the remote. I have tried looking online but can not seem to get it to work.

I checked the number on the inside of the key remote which I then matched to the one on ebay before purchasing.

Any help out there?

  1. Ask
  2. VW
Groups
  1. Ask
  2. VW
3 Comments

my old fiesta you had to put the master key into the ignition and turn it to 1 then take out the the key and use the new key and turn it all the way. might be something similar?

Found these instructions here
You may have to have it programmed at dealer/someone with coding software etc.

1.Switch Ignition On and leave the key in the ignition
2.Lock the vehicle by using a manual key from driver’s door
3.Using he remote fob, press the unlock button – this should make the horn sound once
4.Wait for 6 seconds and press the unlock button once to activate the coding procedure. The remote control will now be programmed.
5.Switch ignition off
6.Remove key from ignition and check for operation
7.The coding procedure can be repeated up to 4 times for additional remotes
8.The ignition must be switched off between programming each remote control

Remote control erasing
1997 or later

1.Switch ignition on and leave the key in the ignition
2.Lock the vehicle by using a manual key from driver’s door
3.Press he remote control lock button 5 times within 1 second intervals. The horn should sound or the indicators flash
4.After 6 seconds press the unlock button once to activate memory erase
5.Switch ignition off

Remote control Synchronisation

1.Open the car using the driver’s door
2.Press the remote control unlock button
3.Put the key into the ignition and switch it on
4.Switch the ignition off and remove the key
5.Press a button on the remote control

Original Poster

Thanks for your replies.

I will try what Shauneco has suggested.
Post a comment
Avatar
@
    Text

    Top Discussions