Groups
    EXPIRED

    WTD Golf Mk3 Lowering Springs

    I wanted the springs for a golf mk3 P reg. I wanted to lower about 40mm but the question is the springs do I replace the springs on the stock shocks? or do I have to buy new shocks? and would i need to do tracking etc again? Can i fit them myself?

    Many thanks =D

    5 Comments

    You do not need to replace the shocks and you can fit them yourself if you have spring compressors. You could do a diy job and cut your springs down with an angle grinder but don't let them get to hot and take the pressure off them by jacking up the car first.

    Some people may say do not do this but I have on many occasions.

    You will then need to get the suspension geometry checked or you risk tyre wear.

    Original Poster

    where do ya live can u help me mateyy?

    Original Poster

    well can u guide me through really want to do this !!! =D

    Would love to help but going away tomorrow on my hols. :thumbsup:

    Original Poster

    When are you back!!!!!!! =[
    Post a comment
    Avatar
    @
      Text
      Top Discussions
      1. Can anyone share their Sky Go with me for £7.50 a month?12
      2. Working conditions, workers rights. Standing at work causing pain. Is this …716
      3. Fitting a wired doorbell advice needed22
      4. Freesat - Dave1117

      See more discussions