Dremel Deals & Offers

Just got email notifying me order will be cancelled due to quality problems . " Message from seller angemart1999: Dear customer, Thank you for coming to our store to buy this item.We found quality problems with this new batch of goods so have already returned to the supplier. In order to keep better customer experience and save your time,our advice is to give you a full refund. What do you think? I am very sorry to tell you this message.Thanks for your understanding. Best regards," So I guess this one should be expired .

Any idea how to get one of these to attach to: https://www.amazon.co.uk/gp/aw/d/B000T9R0B4/ ? For ref to attach to the lidl dremel tool you need the Dremel 4486 keyless chuck. This: https://www.amazon.co.uk/gp/aw/d/B0002SMMY2/ I'm unsure how yours is broken so don't know if it'll work as it needs to screw in etc.

does anyone know if this will fit on the Parkside Lidl Rotary Tool? as mine is broken and it wont hold a bit in anymore.

does anyone know if this will fit on the Parkside Lidl Rotary Tool? as mine is broken and it wont hold a bit in anymore.

Does anyone know if this would fit the Aldi (Ferrex) or Lidl rotary tools?

These are crazy IMO, my dremel goes very fast even at it's lowest speed, The normal cutting wheels can and do easily catch and shatter, particularly when cutting such things as pipe.With no guards! Cut copper/metal pipe with a hacksaw. IMO For copper pipe use the simple plumber's tool which gives a nice rounded edge to the pipe Voted hot for the price, but oh dear

Have to agree I’ve only had one fail so far out of around 20 which was my own fault applying too much pressure by rushing.

FYI - if you already have the shaft SpeedClic shaft, the the 12 pack of blades are also currently on a relativity good deal Posted Here

I disagree with the the first 2 posts; maybe it is the way you cut or maybe I'm just lucky These, in my experience, seem to last longer and cut better. I'm regularly cutting daily on "good" metal, and can have a blade for a long time before it either gets too small or it snaps (which doesn't happen a lot - usually crushed by user error!). As usual, cutting spray helps with cutting and saving the blade I'll be honest I never had much luck with the screw on blades which seem to fail easily because of nominal contact between blade and shaft; the SpeedClic has addition metal on the actual blade, and larger contact with the shaft which seems to make for a more solid blade JMO - YMMV Anyhoo - seems like good deal OP (y)

Remember it is a dremel though and not an angle grinder. Always got on OK with the speed-clic wheels apart from standing on them!

Can you get replacement tips for these?

Hahaha nice! I've never had that before... If you want to, jam it on high and stick loads of jb weld around it, then hope for the best? Probably time to get a new one (y) I've not had troubles with valves on this or the Aldi ones I used to buy.

On mine the switch/valve from where you adjust the intensity of the heat appears to leak gas and catches fire taking the hairs of your hand with it.

Not sure what you mean by valve and leaking? For electronics; you would heat up the iron and melt the solder onto the tip, then apply onto the wire/pcb with additional solder. You can tin the wires first (add melted solder onto wires) before soldering the other end if you have trouble with soldering. Assuming you know how to solder- It could also be the solder which doesn't have much flux to get it to play nicely with others. It's good practice to always clean your tip. Flux/lube is always your friend. :D

Nice spot. Really want the Versaflame but this is definitely worth a play with at this price. Bonus £1 no rush available too.

That’s a lot of extra attachments!

I got the 3 attachment bundle for a little bit more last time.

Seems price is now 133?

These are worth every buck

Lol, that was quick based on the comments in the other post :-)

Agree! Spend more , get more longetivity and a better feel. for some, budget is above all other priorities. But here if you can, stretch the budget a little, they’re much nicer to use

You see your own response as helpful? ooooooohkaaaaay.

Really don't know - sorry.

Didn't know that, I checked myself and couldn't find it. Do you think it may just be specific accounts??

They occasionally give you an option to pay over x amount of months, The offer doesnt appear to be there. I bought mine around 9.30 this morning.

FYI - these are far better than the screw on cutting disks; they last longer, are less likely to snap, and the conveint changing mechanism makes all the difference. I do a lot of dermal cutting, and would never go back But £5.77 for 2 disks is expensive IMO so cold for me

I do not need twelve and I don't want to pay 4.99 to have them delivered.

Nah, they're MiniDisc format.

For the occasional DIYer, this is just fine.

Close to £1 each when you buy 12 https://www.amazon.co.uk/Dremel-SpeedClic-Cutting-Wheels-Accessory/dp/B001DH7X22 This deals not cheap.

I bought one and found rubbing my flexible shaft briskly helped with with control when I got on the job

Clone versions often aren't compatible and then you're stuck trying to return something you bought on ebay

Isn't if free delivery from amazon if its over £20?

hahaahaha

Resin is taking a rapid increase with accessibility these days. However we'll see another bump with heated chamber patent expiring would be my guess.

Is it me or have 3D printers hit a bit of a dead end in terms of market penetration? I don't avidly follow the tech but they've been out for quite some time now but still seem like early adopter/prototype machines rather than making their way into even the average enthusiasts home.

Exactly right

A £300 (at best) printer tradining on its name. Kodak did the same. All they have done is stick a badge on it, put it in a box and made the print area small in the process. Absolutly no reason to buy it. Think they were aiming at the school/uninformed general public in order to get sales.

Compared to say an Ender 3 for much the same same results and the Ender having a bigger print area I think I would give this a miss

You won't go wrong, Tacklife is A1 for the quality and price (I'm sure it's an Amazon brand etc) ;) maxmix

Thanks had a look at that brand and seem very good for the price and for what I need. May even get feather in law one for his tool collection

Got similar but cordless (12v) from Lidl last week for £8.99 (store opening offer but was only £17.99 full price).

Thanks ordered. Compatible with all dremel accessories as well.

Works great and at a great price. Highly recomended

Same price in bishop auckland didn’t need one so got two just to put in my garage LOL

Amateur engraver of the year.

Also don't need it but I'm going to buy myself a trophy and have some fun! I'm thinking awarding myself with the most difficult stuff! Any ideas? (confused)

Ooh I like it. Now I’m thinking what could I engrave? See if I can come up a justification to have it.

Nice discount. I don't know what I'd need this for though.

Sorry, it went a while bacn

Hi just saw it today. By the way do you still have it?

No Maidenhead

Get the corded 3000 Dremel. It has 10 X the torque under load, like cutting stone.

With the correct disc, could this cut through natural stone? Only need to cut about 10mm deep.

(y)

I'd say this is a must have if you own a Dremel, makes life so much easier.

If you dont have prime then a genuine Dremel is available on Ebay for five pounds

They really should supply this with the unit - thanks OP, ordered one as it's a hassle using multiple collets.

Just got Dremel for Christmas, haven't used it yet, not sure if I need this, but is cheap. Edit: Bought one.

If anyone can pick one for me I would pay you for the trouble and postage and of course the product.

This deal is still on btw. Scanned at Luton for 80.44 but scanned and bought at Dartford for 34.44 - it shows one more in-stock. Thanks op.

There was one available at Sheffield drakehouse, reserved and phoned up to ask the price - came back at £80.44. There was also one at chesterfield road, same story though, scanned at £80.44

To be honest the 8100 and 8200 are much the same. I don’t think there is much in it and for slightly more in price, it’s still just as good.

Does anyone know how this compares to the Argos eBay offer on the 8100 for around £40? TIA

Bargain but back up to £15.29 now...

Have some heat

21.50 now?

Ta

Good Spot!

Nice price for OG Dremel... Is there just the 3 speedclic discs included ? That's the only real value I see for someone who already has the rest,but still a v.nicereduction and great deal

Bought a cheap Chinese one for £1.30 and it works fine, but I would have bought a proper Dremel one for this price.

Great butt plug

This is what all dremels should come with from the start. Don’t understand why u would use different size collets for different accessories when this fits everything

Ordered, thanks.

The dremel ones are best too. I bought a few non branded (I use them a lot) and they are poor in comparison.