Unfortunately, this deal has expired 2 days ago.
272°
35
Posted 22 April 2023

febi bilstein 48871 Oil Drain Plug with seal ring £2.18 @ Amazon

£2.18
cyberbabenilorac's avatar
Shared by
cyberbabenilorac Editor assistant
Joined in 2014
1,026
223

About this deal

This deal is expired. Here are some options that might interest you:

More Car Parts deals

Find more like this

See all deals

Discover more deals on our homepage

This product is an original febi bilstein product.

febi bilstein stands for solutions "Made in Germany" and is one of the world's leading manufacturers and suppliers of spare parts for passenger cars and commercial vehicles in the independent aftermarket. For over 170 years the brand has stood for continuity, quality, service, reliability and innovation

Please use the vehicle identification at the top of the page to confirm compatibility with your vehicle. All restrictions must be observed!

The febi bilstein product range offers the right spare parts in convincing original equipment quality for all common vehicle types. With more than 37,000 spare parts in our range, febi bilstein has exactly the part you need.

Before carrying out repairs on your vehicle, please be sure to observe the vehicle manufacturer's instructions.

Features & details
  • Original febi bilstein spare part - Solutions „Made in Germany"
  • Please use the vehicle identification at the top of the page to confirm compatibility with your vehicle. All restrictions must be observed!
  • Length: 29,5 mm; Outside Thread: M14 x 1,5; Wrench Size (Metric): 19 mm; Fastening Type: Hexagonal; Material: steel; Surface: galvanized; Length under Head: 22 mm; Connection Diameter: 25 mm
Amazon More details at
Community Updates
Edited by cyberbabenilorac, 22 April 2023
New Comment

35 Comments

sorted by
's avatar
  1. austinc's avatar
    austinc
    Go on the autodoc app and type in the part no, select the part then tap on compatible vehicles, brings up a complete list. 50037598-IKyp2.jpg
  2. deleted2784183's avatar
    Anonymous User
    That ribbing looks like it would be painful
    pazzyt's avatar
    pazzyt
    Its a thread so you screw it in .
  3. gmblr's avatar
    gmblr
    Ordered one for my Tesla. Thanks
  4. dichromate's avatar
    dichromate
    Bought some copper washer instead from ebay, less wasteful and creates a better seal.
    john184's avatar
    john184
    You can re-anneal copper washers by heating them with a blowtorch, useful if you don't have a spare.
  5. john184's avatar
    john184
    Various sump plugs including I think the one in the picture have larger threads than the washer so you can't replace it particularly easy. Must make them harder to manufacture just to generate a create a consumable item.

    I regularly just put the old one back in. Doesn't leak. Just make sure not to over torque as modern aluminium sumps have the structural integrity of cheese.
    bargainhunterDELL's avatar
    bargainhunterDELL
    A slither of PTFE tape around the thread when re - using and it will never leak and you won't need to over tighten risking stripping the thread.
  6. spinks's avatar
    spinks
    Just replaced my original 2009 worn out Audi plug. £2.55 at GSF if you need it urgently.

    Plug should’ve been replaced during the January service but they skimped on it and cost me another oil change plus oil on driveway. Which is easily removed with spray brake cleaner.

    Correct torque is 30nm. If you can’t get that you’ll be asking for a leak. (edited)
    bargainhunterDELL's avatar
    bargainhunterDELL
    A slither of PTFE tape around the thread will prevent any small leaks and you then don't need to over torque risking stripping thread.
  7. federalex's avatar
    federalex
    as said above, ptfe tape and a crushable copper washer. if your pan is aluminium i would personally under torque it by 5nm, if it drips add a couple more. when you get it right without leaking note down the torque for next time. I learnt this from stripping a pan tightening it to torque spec
  8. volksdub's avatar
    volksdub
    Thanks, got two
    l4ndy's avatar
    l4ndy
    You definitely won't have any leaks if you fit two
  9. nothingmuch's avatar
    nothingmuch
    Says it fits my car in description but not in amazons confirmed fit, interesting
  10. HKSP5's avatar
    HKSP5
    Can you not subscribe and save on these?
  11. Aaron9191's avatar
    Aaron9191
    I’d recommend spending a bit more for a magnetic one.
    itsillogical's avatar
    itsillogical
    As 14ndy said above, most are cheap Chinese ready to snap metal and like he found I ended up having to drill the core out after the head snapped off. So buyer beware.
  12. ScrewYou's avatar
    ScrewYou
    Is that what it is 😰
's avatar