Unfortunately, this deal has expired 10 September 2023.
*
47°
Posted 5 August 2023
DEWALT DCN692N Cordless XR 2 Speed Framing Nailer 90mm 18V Bare Unit - DCN692N-XJ. (£259.95 with newsletter signup)
Free ·
Shared by
replicant69
Joined in 2012
10
1,231
About this deal
This deal is expired. Here are some options that might interest you:
£269.95
£259.95 with newsletter signup (£10 off for new customers) **thanks to rob_triggs**
DEWALT DCN692N Cordless XR 2 Speed Framing Nailer 90mm 18V Bare Unit - DCN692N-XJ
DEWALT DCN692N Cordless XR 2 Speed Framing Nailer
Bare unit, NO battery or charger supplied.
The DEWALT DCN692 Cordless XR First Fix Nailer has two speeds (or power levels) to optimise the nailer for firing all lengths of nails. Its BRUSHLESS motor technology offers the power to fire 90mm ring shank nails into soft wood and 63mm into hard woods.
The nailer has two modes. The sequential operating mode allows for precision placement and the bump operating mode provides the user with production speed.Its mechanical rather than gas operation offers consistant performance and minimises cleaning/service requirements. Tool free stall/jam clearance minimises user down time.
The DCN692 has a versatile 30-34° magazine angle that will accept most clipped head and off centre round head paper tape or wire weld collated framing nails. Depths can be easily adjusted using the thumb wheel depth adjuster.
The nailer has excellent vibration and sound figures, which offer fantastic user protection. The tool has an ergonomic design to allow the nailer to fit easily between a 400mm centre stud. A reversable belt/rafter hook povides increased portability and versatility on the job site. Increased visibility and durability along with protection for work-surface from the non-mar contact trip with lock-off to prevent accidental discharge of the fastener.
Specification
Input Power: 18 Volt.
Nail Diameter: 2.8-3.3mm.
Nail length: 50-90mm.
Magazine Capacity: up to 55 nails.
Firing mode: Bump and Sequential.
Weight: 4.1kg.
£259.95 with newsletter signup (£10 off for new customers) **thanks to rob_triggs**
DEWALT DCN692N Cordless XR 2 Speed Framing Nailer 90mm 18V Bare Unit - DCN692N-XJ
DEWALT DCN692N Cordless XR 2 Speed Framing Nailer
Bare unit, NO battery or charger supplied.
The DEWALT DCN692 Cordless XR First Fix Nailer has two speeds (or power levels) to optimise the nailer for firing all lengths of nails. Its BRUSHLESS motor technology offers the power to fire 90mm ring shank nails into soft wood and 63mm into hard woods.
The nailer has two modes. The sequential operating mode allows for precision placement and the bump operating mode provides the user with production speed.Its mechanical rather than gas operation offers consistant performance and minimises cleaning/service requirements. Tool free stall/jam clearance minimises user down time.
The DCN692 has a versatile 30-34° magazine angle that will accept most clipped head and off centre round head paper tape or wire weld collated framing nails. Depths can be easily adjusted using the thumb wheel depth adjuster.
The nailer has excellent vibration and sound figures, which offer fantastic user protection. The tool has an ergonomic design to allow the nailer to fit easily between a 400mm centre stud. A reversable belt/rafter hook povides increased portability and versatility on the job site. Increased visibility and durability along with protection for work-surface from the non-mar contact trip with lock-off to prevent accidental discharge of the fastener.
Specification
Input Power: 18 Volt.
Nail Diameter: 2.8-3.3mm.
Nail length: 50-90mm.
Magazine Capacity: up to 55 nails.
Firing mode: Bump and Sequential.
Weight: 4.1kg.
More details at Community Updates
Edited by replicant69, 5 August 2023
14 Comments
sorted byBeen keeping an eye on both but not committed yet as not sure what I actually need! (edited)
box a bit tatty and registered fine with dewalt .
£223 which is around the eBay price for used (edited)