ARCTIC Liquid Freezer II 420 A-RGB - Multi-compatible all-in-one CPU AIO water cooler with A-RGB, efficient PWM-controlled pump, fan speed: 200-1900 RPM, LGA1700 compatible - Black
More details at
Community Updates
MariR
RCTIC Liquid Freezer II 420 A-RGB - Multi-compatible all-in-one CPU AIO water cooler
QUALITY CONTROL APPROVED: We have increased the quality assurance and quality control. The products have been subjected to additional tests and marked with a QC sticker
LGA1700 COMPATIBILITY: The Liquid Freezer II 420 A-RGB is compatible with Intel's new Alder Lake processors - Socket LGA1700
PERFORMANCE KING: With a more efficient cold plate, proprietary pump and fans optimized for static pressure, the Liquid Freezer II series clearly sets itself apart from other AiO water coolers
ELEGANT ILLUMINATION: 36 digital A-RGB LEDs placed along the fan hubs plus the transparent rotor, with its closed design, provide even and rich illumination
INTEGRATED CABLE MANAGEMENT: The PWM and RGB cables of the radiator fans are integrated into the sheathing of the hoses, reducing visible cables to a minimum
About the Product:
Future-proof compatibility At the end of 2022, AMD has released the AM5 socket, the successor to its popular AM4 platform. Because all mechanical dimensions remain identical, we are able to ensure the compatibility of ARCTIC coolers with AMD's new processors.
Additionally, all coolers shipped by ARCTIC are already compatible with Intel's Alder Lake and Raptor Lake LGA1700 processors.
Coolers purchased from resellers, however, may still have been shipped without the corresponding accessories.
Best CPU Water Cooler The Liquid Freezer II series has been reviewed numerous times by independent reviewers and praised for its performance and quietness. It consistently exceeds all expectations and sets new standards in compact water cooling. As a further mark of recognition, the Liquid Freezer II series was awarded the “European Hardware Award 2022” for the best CPU water cooler.
Optimized for AMD Ryzen AMD has been using a new multi-die layout for its high-end AM4 processors for a few generations now. In these processors, the hotspot is not centered by the IHS (Integrated Heat Spreader). To still allow for optimal heat dissipation, we have developed a special mounting kit for the Liquid Freezer II that allows the cold plate to be placed directly over the hotspot of the CPU. AMD's upcoming 7000 series AM5 processors are also come with multi-die layouts and can therefore benefit from the Liquid Freezer II's unique offset mounting.
Create your own look The Liquid Freezer II A-RGB combines the Liquid Freezer II series' efficient, proprietary PWM water pump with ARCTIC's new A-RGB fans optimized for static pressure. This allows for perfectly matched, multi-color lighting effects. With the help of the advanced A-RGB Gen.2 technology and customizable LEDs, you can design your system with your very own look.
Efficient, proprietary pump While many manufacturers use a generic water pump, we‘ve gone to great lengths to develop our own. The results? Quieter operation and higher efficiency. And, like the Liquid Freezer II’s fans, the water pump is PWM-controlled and adjusts its speed accordingly. This not only leads to significantly lower noise levels at low and typical loads, but also a much lower power consumption for all components of the AiO.
High quality tubing with integrated cable management The Liquid Freezer II's fiber-reinforced 45 cm tubing allows for installation even in large cases and effectively prevents coolant evaporation, so you don't have to worry about refilling your compact water cooling system.
Plus, our sophisticated cable management hides both the RGB and PWM cables of your radiator fans in the sleeving.
This makes installation easy and tidy: you only have to connect two connectors to the mainboard, and there are no other cables to hide.
Quiet VRM fan Small fans have the reputation of being particularly loud and not very durable; that’s why we set out to develop a quiet, sturdy diagonal fan especially for the Liquid Freezer II. We’re 100% convinced that this 40 mm fan is just as durable as our other case fans.
The fan is PWM-controlled and can cool your voltage converters and the socket area almost inaudibly by up to 15 °C especially in overclocking scenarios, with insufficient VRM cooling or in cases with low airflow and thus allows continuous high load. Provided there is sufficient VRM cooling, it can be turned off at will.
Premium class radiator We rely on 38 mm thick radiators with a high fin density. This allows a larger amount of water to be used in the circuit and significantly increases the cooling surface area.
Water has a much higher heat capacity than aluminum or copper. This leads to a slower and an up to 5 °C lower temperature increase in the time-limited turbo mode of modern CPUs.
Fans optimized for static pressure The illuminated P-fans are already mounted on the radiator from the factory. During the development of the new P-serie fans, special emphasis was placed on a focused airflow and thus a high static pressure. The fans ensure extremely efficient cooling, even with increased air resistance. Therefore, the P-series fans are particularly suitable for use on heatsinks and radiators.
Find more information about the P-Fans in our FAQ.
Edited by a community support team member, 11 July 2023
If you can fit it in your case then this is the cooler to get for the high end. I've been running one for a year now in a modded Phanteks P500A in a push-pull set up.
justhighend4u Author
Just bought this for a 13900k, Looking forward to the lowest temperatures possible.
Be aware though you will need a big pc case to accommodate. Always wanted one of these as it is probably the best available as much thicker radiator than the completion.
ooogemaflip
Got mine in a Meshify 2XL
ivandias
This is the best cooler. Keeps my Ryzen 9 temps in check (32C Idle) 👌
Brvd
Might get this and see if it changes the temps of my 5950x. Currently have a NZXT Z73 in a Lian Li O11-D and the idle temps always have been pretty high (60-65c in what is probably a 20c room) even with using a variety of different fan configurations.
Xyzac
The normal O11-D won't fit a 420 radiator unless you have the XL?
justhighend4u Author
Thanks for the Heat guys. Haven't posted for a while but sure wanted to show this. Its the best and super cheap.
OpportunistMe
Will this fit the Corsair 4000D AIRFLOW Tempered Glass Mid-Tower ATX Case? amazon.co.uk/dp/…V3D
justhighend4u Author
Hi unfortunately not This is 420mm long , you may be able to fit a 360 in the front. The top can fit a 240 or 280mm.
You can find it HERE on the Amazon website
About the Product:
Future-proof compatibility
At the end of 2022, AMD has released the AM5 socket, the successor to its popular AM4 platform. Because all mechanical dimensions remain identical, we are able to ensure the compatibility of ARCTIC coolers with AMD's new processors.
Additionally, all coolers shipped by ARCTIC are already compatible with Intel's Alder Lake and Raptor Lake LGA1700 processors.
Coolers purchased from resellers, however, may still have been shipped without the corresponding accessories.
Best CPU Water Cooler
The Liquid Freezer II series has been reviewed numerous times by independent reviewers and praised for its performance and quietness. It consistently exceeds all expectations and sets new standards in compact water cooling. As a further mark of recognition, the Liquid Freezer II series was awarded the “European Hardware Award 2022” for the best CPU water cooler.
Optimized for AMD Ryzen
AMD has been using a new multi-die layout for its high-end AM4 processors for a few generations now. In these processors, the hotspot is not centered by the IHS (Integrated Heat Spreader). To still allow for optimal heat dissipation, we have developed a special mounting kit for the Liquid Freezer II that allows the cold plate to be placed directly over the hotspot of the CPU. AMD's upcoming 7000 series AM5 processors are also come with multi-die layouts and can therefore benefit from the Liquid Freezer II's unique offset mounting.
Create your own look
The Liquid Freezer II A-RGB combines the Liquid Freezer II series' efficient, proprietary PWM water pump with ARCTIC's new A-RGB fans optimized for static pressure. This allows for perfectly matched, multi-color lighting effects. With the help of the advanced A-RGB Gen.2 technology and customizable LEDs, you can design your system with your very own look.
Efficient, proprietary pump
While many manufacturers use a generic water pump, we‘ve gone to great lengths to develop our own. The results? Quieter operation and higher efficiency. And, like the Liquid Freezer II’s fans, the water pump is PWM-controlled and adjusts its speed accordingly. This not only leads to significantly lower noise levels at low and typical loads, but also a much lower power consumption for all components of the AiO.
High quality tubing with integrated cable management
The Liquid Freezer II's fiber-reinforced 45 cm tubing allows for installation even in large cases and effectively prevents coolant evaporation, so you don't have to worry about refilling your compact water cooling system.
Plus, our sophisticated cable management hides both the RGB and PWM cables of your radiator fans in the sleeving.
This makes installation easy and tidy: you only have to connect two connectors to the mainboard, and there are no other cables to hide.
Quiet VRM fan
Small fans have the reputation of being particularly loud and not very durable; that’s why we set out to develop a quiet, sturdy diagonal fan especially for the Liquid Freezer II. We’re 100% convinced that this 40 mm fan is just as durable as our other case fans.
The fan is PWM-controlled and can cool your voltage converters and the socket area almost inaudibly by up to 15 °C especially in overclocking scenarios, with insufficient VRM cooling or in cases with low airflow and thus allows continuous high load. Provided there is sufficient VRM cooling, it can be turned off at will.
Premium class radiator
We rely on 38 mm thick radiators with a high fin density. This allows a larger amount of water to be used in the circuit and significantly increases the cooling surface area.
Water has a much higher heat capacity than aluminum or copper. This leads to a slower and an up to 5 °C lower temperature increase in the time-limited turbo mode of modern CPUs.
Fans optimized for static pressure
The illuminated P-fans are already mounted on the radiator from the factory. During the development of the new P-serie fans, special emphasis was placed on a focused airflow and thus a high static pressure. The fans ensure extremely efficient cooling, even with increased air resistance. Therefore, the P-series fans are particularly suitable for use on heatsinks and radiators.
Find more information about the P-Fans in our FAQ.