Unfortunately, this deal has expired 22 September 2023.
*
43°
Posted 24 July 2023
Makita SP6000J1 240V 165mm Plunge Saw in Case with 2 x Guide Rail Connector Bar & Clampt
Free ·
Shared by
Fishy7wishy
Joined in 2019
3
78
About this deal
This deal is expired. Here are some options that might interest you:
Makita SP6000J1 240V 165mm Plunge Saw in Case with 2 x Guide Rail Connector Bar & Clamp
Features:
Makita SP6000J1 Plunge Saw:
Close to wall cutting - Can perform a cut only 18mm away from the wall.
Non-Slip Rubberised Handles - contoured comfort grips handle reduce user fatigue during prolonged use.
Depth Stopper for splinter free cutting - enables a preliminary cut at a depth of 2mm.
Tip Resistant Design - sliding the lever prevents this tool from falling down towards blade case.
Connectable to a vacuum cleaner - keep workplace free from airborne dust particles. Sawdust ejection backwards for comfortable operation.
Easy Blade Replacement Design - Lever locks blade in replacement position, hex wrench can be used through hole in casing and is stored afterwards in the handle.
Comes With:
Carbide tipped blade
Connector carry case
1 x Makita Guide Rail Connector
2 x Makita 1.5M Guide Rail
1 x Excel 1.4/1.5m Guide Rail Bag
1 x Guide Rail Clamp Set
Product Specification
Makita SP6000J1 Plunge Saw:
Barcode: 0088381638999
56mm max cut @ 90° / 40mm max cut @ 45° / 38mm @ 48°
Blade Diameter: 165 mm
Depth of Cut @ 45º: 39 mm
Bevel Cut Range: 1 - 48 Degrees
Bore Diameter: 20 mm
Noise sound pressure: 91 dB(A)
Noise sound power: 102 dB(A)
Noise K factor: 3 dB(A)
Input wattage: 1300 w
No Load Speed: 2000 - 5200 rpm
Vibration K factor: 1.5 m/sec²
Vibration: Cutting Chipboard: 2.5 m/sec²
**images for illustrative purposes only – please refer to description and specification for full details of product**
Features:
Makita SP6000J1 Plunge Saw:
Close to wall cutting - Can perform a cut only 18mm away from the wall.
Non-Slip Rubberised Handles - contoured comfort grips handle reduce user fatigue during prolonged use.
Depth Stopper for splinter free cutting - enables a preliminary cut at a depth of 2mm.
Tip Resistant Design - sliding the lever prevents this tool from falling down towards blade case.
Connectable to a vacuum cleaner - keep workplace free from airborne dust particles. Sawdust ejection backwards for comfortable operation.
Easy Blade Replacement Design - Lever locks blade in replacement position, hex wrench can be used through hole in casing and is stored afterwards in the handle.
Comes With:
Carbide tipped blade
Connector carry case
1 x Makita Guide Rail Connector
2 x Makita 1.5M Guide Rail
1 x Excel 1.4/1.5m Guide Rail Bag
1 x Guide Rail Clamp Set
Product Specification
Makita SP6000J1 Plunge Saw:
Barcode: 0088381638999
56mm max cut @ 90° / 40mm max cut @ 45° / 38mm @ 48°
Blade Diameter: 165 mm
Depth of Cut @ 45º: 39 mm
Bevel Cut Range: 1 - 48 Degrees
Bore Diameter: 20 mm
Noise sound pressure: 91 dB(A)
Noise sound power: 102 dB(A)
Noise K factor: 3 dB(A)
Input wattage: 1300 w
No Load Speed: 2000 - 5200 rpm
Vibration K factor: 1.5 m/sec²
Vibration: Cutting Chipboard: 2.5 m/sec²
**images for illustrative purposes only – please refer to description and specification for full details of product**
More details at Community Updates
Edited by a community support team member, 24 July 2023
10 Comments
sorted by£175 with free postage here