Unfortunately, this deal has expired 2 days ago.
*
85°
Posted 13 June 2023
eSUN Silk Tri-Colors PLA Filament 1.75mm, Coextruded 3D Printer Filament PLA £22.94 @ Dispatches from Amazon Sold by eSUN Official Store
Shared by
Justyn_Haycock
Joined in 2019
158
82
About this deal
This deal is expired. Here are some options that might interest you:
Tick Apply 15% box
Product DescriptionPrevious page
Next page
What is Silk Mystic PLA Material?
• Silk Mystic PLA combines three individual colors based on Silk PLA, extruded into one filament strand. You can change the visible color by rotating the color-blending filament to different orientations, it can output with incredible pearlescent and gorgeous silk surface.
4 Available Colors:
• Gold Red and Green, Gold Green and Black, Blue Orange and Green, Bronze Purple and Green
Recommended Printing Parameters:
• Printing Temperature: 190-230℃ (Recommended Temperature 210℃)
• Bed Temperature: 45-60°C
• Printing Speed: 40-100mm/s
• Recommended Heated Build Platform: Textured Paper, PVP Solid Glue, PEI
Play Video
Vacuumed Sealed Packaging:
• Antioxidants + Vacuum Packaging + Product Manual
• eSUN filament comes in a sealed vacuum bag with desiccant bag, easily keep your 3D printer filament at an optimal storage condition and free from dust or dirt.
How to Storage:
• 1. If you are going to leave your printer inactive for more than a couple of days, please retract the filament to protect your printer nozzle.
• 2. In order to extend the life of your filament, please place the unsealing filament back to original vacuum bag and stock it in a cool and dry place after print.
• 3. When storing your filament, please feed the loose end through the holes on the edge of the filament reel to avoid winding, so that it feeds properly when you use it next time.
Please Notice:
• It is recommended to use with the eBOX Lite Dryer Box to ensure that the filament spool rotates smoothly, it can avoid uneven colouring of the model due to wobbling filament.
• Silk Mystic PLA has little poor cooling, please try to reduce the overhanging angle structure of model or reduce the printing speed to improve printing effect.
More details at
Community Updates
Edited by a community support team member, 13 June 2023
9 Comments
sorted byIf anyone has used these specific ones it'll be great to see any photos! Thanks (edited)
thanks OP - I bought the red gold green tri colour PLA also
I have too much PLA but this makes fun 3D projects even more fun
if you're going for ANY of their silk PLAs though they are brittle AF and weak. MUST be dried first (if you don't have a filament drier don't even bother), and don't make anything structural out of it. I've made lamp shades, lamp covers, and a few low-load brackets out of eSun white silk PLA and all are still going strong to this day