Unfortunately, this deal has expired 15 April 2022.
*
421°
Posted 16 March 2022
Livarno Home Shower Riser Set - Square or Round fixed and hand shower heads with fixings and connection hose - £29.99 (In-Store) @ LIDL
In store: National ·
Shared by
Random1234 Super Poster
Joined in 2017
3,768
2,173
About this deal
This deal is expired. Here are some options that might interest you:
Amazing price for this Shower Riser set at £29.99 from 17 March at LIDL stores
Choose from:
Square Head
Size: H99.55 x D36cm; fixed shower head: 17.6 x 17.6cm, hand shower head: 4.2 x 23cm
Round Head
Size: H99.55 x D36cm; fixed shower head: Ø18.8cm, hand shower head: Ø11 x 24cm
Material:
- For a luxurious shower experience
- Large fixed shower head plus a hand shower with a powerful rain spray pattern
- 150cm shower hose with swivel hose end to prevent twisting and kinking
- Easily connects to your existing fittings
- Switch between 2 shower heads
- Easy-to-clean anti-limescale soft nozzles
- Hand shower uses less water thanks to flow restrictor
- Includes fixings and 80cm connection hose
- Includes: wall plug (Ø6mm), hand shower, low flow gasket, gasket, hand shower hose (150cm), fitting hose (80cm), diverter, cover cap (preinstalled), plastic screw (preinstalled), screw, fastener, hand shower bracket, fixed shower head with preinstalled gasket, shower rod, wall mount, cover
3–year warranty
Choose from:
Square Head
Size: H99.55 x D36cm; fixed shower head: 17.6 x 17.6cm, hand shower head: 4.2 x 23cm
Round Head
Size: H99.55 x D36cm; fixed shower head: Ø18.8cm, hand shower head: Ø11 x 24cm
Material:
- Shower riser rail and shower hoses: stainless steel
- Chrome-plated; seals: silicone
- Fixed shower head / hand shower: POM
More details at
Community Updates
Edited by Random1234, 16 March 2022
You may also like
Related Discussions
Related Categories
29 Comments
sorted byNo, it doesn't click solidly. Seems a bit flimsy. Will be returning mine.
These are adjustable so should match up with your existing holes
Assuming yours is the same as this one, would you mind being a legend and measuring the distance between the two posts (that fit into the wall)?
Fingers crossed this'll fit in the existing holes where my non-rain shower riser rail is
I had one that wasnt too far from wall and even with the angled back bit of the bath I could still stand under it - eventually I just angled the rain head a tiny bit and it changes the flow a lot - screwfix/toolstation do one for £45/40 with a further reach which I replaced mine with when it broke
Same for me. Returned and then opened another one. Same. Looked like spots of rust all over the shower head.
Of course, it’s 6 inches from the middle of each hole. Hope that’s helpful
However I now find I have trouble with the diverter valve on the new shower unit.
Just in case any smart Alec wants to suggest why bother to buy a second if I was happy with the first? I left the first in the previous house plus I have changed Countries.
Right my question Is this, the diverter does not work.
The diverter constantly leaks.
Also I now have water coming from both the hand shower and the overhead rain shower.
How do I take the diverter apart in an attempt to fix it?
I have lost the recepeipt and so cannot take it back to Lidl
Stuart Brown
For shower cubicle, I would think should fine. Probably thats where this meant to be. Not for bath/shower.
Technically yes - these are effectively a fancy shower hose so will screw on fine. You may find that the pressure isn’t quite enough though - hard to say
No these aren’t designed to attach to taps - I’m sure you get a converter but not sure it’s worth it!
Banging on bath taps is not recommended- very uncomfortable (edited)
Top man, thanks!
Yes.
It really doesn't, I get the same depth just hanging my shower head on its support 👎
I think it will work on most systems as its just the riser rail and head and doesn't include a valve.
Remember a gravity system is low pressure so it may trickle out of the head unless it has a pump on the system
Was planning this myself but from the below I might need to do some measuring tonight
I'm now wondering if there's some jiggery pokery I can do to extend the depth from the wall.
Won't help the pipe but would be more roomy from the wall (edited)
I picked one up yesterday and can confirm they now have one sliding mount and use the diverter as the lower mount.
Will be taking mine back as I am replacing an existing rail.
I have connected a similar one to the bath mixer tape.
All you need is change the short hose at the front to a shower hose, they are all same fittings. The only thing is that the shower is usually a bit too long so looks a little unsightly.
How did you work this out? It would be great to know exact distance from wall to center of shower head
is something you might be able to help with? Would be forever grateful! 👐 (edited)