Welder Deals

Welder Deals & Offers

9 deals 157 comments
Stanley TOP MIG1400 (SW58905) 130A MIG Welder 240V £249.99 Screwfix
29°Expired
Found 1st Feb 2017Found 1st Feb 2017
This may be rather more than many readers want to spend on a St. Valentine's day gift for their wife or significant other, but it is a really good price for a 130A MIG welder that … Read more
othen

I don't really need one either - but I don't think I'll be able to stop … I don't really need one either - but I don't think I'll be able to stop myself buying it :-)



​My finger accidentally 'like' your post. Anyone any idea how to remove an accidental 'like'? Cheers.
TIG is used with a filler rod, much like oxy-acetylene welding. Mig uses a wire fed up through the torch.
TIG is a much more expensive system, not really for the amateur.
Will this be up to scratch.
I don't think there's any money to be made buying and reselling these migs. They will be cheap Chinese migs and you can buy similar ones around the same price. However, if you have a limited amount of welding to do on say a car restoration project, or you just need to get your car through an mot, something like this would probably be up to the job.

The mig-welding.co.uk forum is a fantastic resource for anyone starting welding or needing advice.
othen

I don't really need one either - but I don't think I'll be able to stop … I don't really need one either - but I don't think I'll be able to stop myself buying it :-)



Well that is the 'curse' of looking on hukd! Although I suppose if it is usually £400 then someone could potentially sell it on for a bit less than that in a few days and make some profit. Depends what the demand is for this type of item. Also the possibility of being scammed though. So probably not worth the hassle to make a quick few pounds.
Scan Cowsplit Leather Welders Gauntlets £3.75 del @ Amazon (sold by Langley Steelworks Ltd - under other buying choices)
383°Expired
Found 23rd Feb 2016Found 23rd Feb 2016
Was browsing the net for some welders gauntlets as I tend to do most Tuesday nights and came across these. They're £5.42 del with prime from Amazon, but under other buying choices … Read more
Mod & Ed Get dealGet deal
Excellent, thanks. Bought for log burner. They actually seem to sell the same ones as log burner gauntlets.
Initial thought: cheap deal but will resist (I don't weld).

Then I read the reviews (you know, just to check I definitely don't need them) and useful for log burners, fire pits and even cutting prickly hedges. Result: sucked in

2nd review is amusing..
Awesome just bought 2 pairs! 1 for the log burner the other for feeding the crocodile
egonspengler

Cheers mate, I was just biting into a cheese & bean sandwich as I read … Cheers mate, I was just biting into a cheese & bean sandwich as I read your comment, I don't really feel like finishing it now for some reason....


are they also good to replace toilet paper and then wash??
bobo53

what do I do to check if nasty spiders are hiding inside??


Buy another pair, keep them in the fridge (spider-free), then use the second pair to protect your hands when you check the first pair.
7.5% off using discount code @ R-Tech Welding (welders and welding equipment)
15°Expired
Found 22nd Jun 2015Found 22nd Jun 2015
INSTRUCTIONS: Enter the voucher code when ordering to receive 7.5% discount, on R-Tech Welders and Welding Equipment. This code isn't advertised by R-Tech, however i rang to en… Read more
Read More
No longer working! Really want the Tig160! Thanks for posting anyway
well the code still worked for me 10/1/2016.
Code still works 10-01-2016 :-)
Just used this code successfully on 28-12-15. You have to apply it on the first step of checkout when viewing the cart but it works perfectly. Why not use it on a shop soiled offer and save even more money!
Discount code just worked for me and gave 7.5%,pleasant surprise.(12/11/2015)
WhatsApp Alerts!
Deal Alerts!
HotUKDealsPromo Yes!
Oops! Looks like we couldn't connect 😢 Please try again!
HotUKDealsPromo 
Important!
To sign up: add to your mobile contacts, then text us 'Start' via WhatsApp
HotUKDealsPromo 
Arc Welder at Aldi - £39.99
89°Expired
Found 10th Dec 2013Found 10th Dec 2013
Was thinking of buying an Arc Welder to do domestic tasks. These are the only bits of details they have mentioned on their site. What do you guys think? Would this be any good? Don… Read more
Arc welders are great if your repairing or making a trailer or brackets to hang up your ladders in the garage .If it's car repairs you want to do , it's a mig you want .
Not used one but i hear they cut out to easy on a constant run (thermal cutout)

And if folks blow holes in steel with an arc welder they they cant weld !
no good for learning with either unless you want to practice making holes.
I let my oxy-acetylene rig go a few years back because the gas bottle rental got to be too much considering the amount of use I got out of it. So I got a cheap arc welder to fill the gap. Haven't been able to get on with it at all. Certainly you won't be able to weld up a rusty car. They might be good for joining two clean new pieces of steel of exactly the same thickness provided it is the right thickness and you have exactly the right rod for that thickness.
Edited by: "LongPockets" 10th Dec 2013
Ok for thick material, no good for thin sheet, like car bodywork.
160 Amp Turbo Fan Cooled Arc Welder £39.99 INSTORE ONLY @ Aldi
69°Expired
Found 27th Oct 2012Found 27th Oct 2012
Great price for a 160 amp welder. 3 years Guarantee. * Adjustable welding current, range 55-160 amps * Input voltage: 230V/50Hz * Electrode sizes: 1.6-4mm * Input capacity: 8kW * … Read more
Banned Get dealGet deal
well said
Original Poster Banned
I hate when someone is making knocking down comments like this. The fact is that this welder is available for £39.99 and yes it is DIY welder, so if you compare it with the Clarke welder it's a great deal. But if you comparing it with professional heavy duty welders then it is not fair.
Some people are happy driving Corsa yet there is always someone who will tell them that their Range Rover is better.
Its ok for small jobs but if you weld longer than 10 mins it overheats and you have to wait till it cools down again,usually about 15 mins
Original Poster Banned
@morrig exactly, cooker socket usually wired 30 amp + a nail instead of 13amp fuse yyyyhaaaa
Just a thought but the cooker control switch which have a socket could be used and put higher rating fuse for 13amp plug?
Great for bonny night,ace sparks for the kids!
Turbo Fan Cooled Arc Welder current range 55-160 amps  £34.99 Aldi Thurs 27th
231°Expired
Found 22nd Oct 2011Found 22nd Oct 2011
Not sure if this is a good deal. Adjustable welding current range 55-160 amps Input voltage: 230V/50Hz Electrode sizes: 1.6-4mm Input capacity: 8kW Thermal overload protection… Read more
Only a 10% duty cycle at the highest amp setting anyway so it will cut out a lot if your trying to weld continously.
Best to clear up the ACTUAL FACTS here:- bought one Nov 2011
# Its an arc welder NOT a mig , and so apparently very hard to use on thin car body panels - a mig is more suited
# It says on the box NOT to be used with a 13a plug - so of course it will get hot and blow as your overloading the plug , the socket and prossibly the cable supply also >> NOT CLEVER <# You need a dedicated 30amp supply or higher , this ideally will be from a single dedicated 30 to 40 amp rcd from your house fuse box, the supply cable will also need to match the amperage - best not to lob it in on a ring main spur and cross your fingers ...
# The 30 amp (or higher) cable will then terminate in a 3 pin (which is fine) female 32 amp socket (same as caravan hook ups) a 3 pin is fine , you then wire the welder to a the matching 3 pin 32a (caravan) plug
# for those wanting to do a proper supply to edition 7 rules
>>==FUSEBOX RCD 30 AMP== >>== 30 AMP CABLE== >>== OUTBUILDING SEPERATE FUSED RCD AND ISOLATOR SWITCH== >>==30 AMP CABLE ==>>== FEMALE 3 PIN 32AMP SOCKET==>>¦<<===WELDER WIRED TO 32 AMP 3 PIN PLUG

Personally I wouldn't pay to much attention to reports of cutting out , getting hot or blowing fuses unless they say the supply is 100% correct ...
Original Poster
Just picked mine up. Not fitted with a 13Amp plug sticker on the power cable “Important: This high-power appliance is not supplied with a domestic 3 pin plug and may not be connected to a standard domestic socket. The welder must be connected to a 30 A fused spur
coony

It's fine provided you use the thin 1.6mm sticks



Whats the difference? I guess maybe thinner sticks for small jobs or lower melting point metals, thinner metals?
coolcamper55

For car repairs this is too heavy, you would burn through the sheet, … For car repairs this is too heavy, you would burn through the sheet, better with a MIG welder



It's fine provided you use the thin 1.6mm sticks
Newsletter
Deal Alerts!
Want the hottest deals in your inbox?
Subscribe to receive an overview of the hottest deals posted each day.
HotUKDealsPromo
HotUKDealsPromo 
Turbo Fan Cooled Arc Welder, with Handheld Mask - ALDI - Instore
71°Expired
Found 20th Sep 2010Found 20th Sep 2010
Thought this looked really good and I wanted to get into doing some welding. One question could this tackle car repairs for MOT etc...? Info here... The perfect combination for … Read more
Get dealGet deal
All gone by Friday night in Leeds!
Moneyspider

Can this use a standard 13A socket?



yes it does.
Moneyspider

Can this use a standard 13A socket?



Id be very surprised if you could not. Especially if its from Aldi's.
Can this use a standard 13A socket?
Handy as a stocking filler as Christmas
approaches and you can't think what to buy!
Gas/No-Gas MIG Welder (130A) available from 24th May - £139.99 @ Aldi
180°Expired
Found 18th May 2009Found 18th May 2009
Normally Aldi only do stick welders, or fairly low amp mig welders. However, this is the first time I've seen one that could be considered mildly useful. Specs; * 25-130 amps … Read more
Last year i purchased a wolf welder gas/gasless off ebay brand new for around £150.. Used it on gasless for the time being until i got gas, only using it for thin car material for banger racing, if added up only used for around 10 hours! Packed up the other week and has been sent off whilst still under warrenty and they seem to be taking there time to look at it! Definatly would'nt go for a wolf again but seemed a good price at the time.
Have you tried welding with it yet?
Original Poster
OK, I've opened it up now, its a rebadged Wolf. Even the support desk is [url]www.wolfsomething.com/powercraft[/url]...

it also has a 3 year manufacturer warranty, I guess on top of the 2 year Aldi warranty.
Original Poster
To be honest its not even come out of the box yet!! This nice weather is too good to be sat indoors welding...
slimy31;5304750

I've just picked one up, and it's even better than I first thought;.



Thanks very much for the update and info. Had any chance to have a go yet? Any indication of what it may be rebranded from?
  1. Voting

    Deal temperatures are the heart of HotUKDeals. If you think a deal is hot, vote it up by clicking the red plus. Otherwise, cool it down by voting cold.

    Tip 1 of 6
  2. Comments

    Read what other members have to say about a deal and share your own opinion.

    Tip 2 of 6
  3. Add Deal

    Have you found a good deal yourself? Share it here and other members will vote on how hot the deal is.

    Tip 3 of 6
  4. Deal Link

    If you think a deal is hot, click through to the shop to snap up the deal before it’s expired.

    Tip 4 of 6
  5. Layout

    Find here other ways to view the deals. You can view it in either grid, list or text only view.

    When clicking this gear icon you can find other ways to view the deals. You can view it in either grid, list or text only view.

    Tip 5 of 6
  6. Main Menu

    Through our main menu you can navigate to certain categories or shops you are interested in.

    Tip 6 of 6